t4 slide door bottom roller. change

[WILLY]

hi any 1 changed there bottom roller on slide door
1 of my rollers has broke.
how easy are they to change
cheers,willy:1zhelp:

[WILLY]

now sorted ,, bought a bottom runner off ebay,, £14 ground old steel rivet out of connector arm and replaced new unit on arm, and used a ball hammer to flatten head of new rivet on arm,
sorted :D

[Jay1000blue]

Hi willy. I have just done the same and bought the same part it appears! Did you have any problem getting the door to line up afterwards? I am having a nightmare trying to get it to close properly now!! :aargh4:
Any suggestions? Thanks Jay

[WILLY]

hi sorry, the replies late, had no computor mines broken
i lined my door up on the bottom arm there is a bit of a adj on the arm before you nip up the bolt
hope this helps

[t4caravelle]

easy job, just udo the three bolts off the door and the whole thing comes out with a bit of wiggling.Last time i did one VW qoute me 70 odd quid for new one, got one for twenty quid from breakers in witney oxon.;)

[t4caravelle]

Make sure you put something under door to support it before undoing the bolts that hold it to the door or you'll bend something. ok
Russ:biglaugh: