Basic Settings On Vag Com

[cyberduderen]

I have a 1996 Audi A4 2.6 V6 that keeps cutting out I've changed various things and I'm starting to get fed up with it.
Can anyone talk me through how to input the basic settings using vag com version 4.
Cheers :beerchug:

[Crasher]

ABC engine? PM me your email address, it is too long winded to post here.

[cyberduderen]

Thanks for that mate I'll try and have a go at it the weekend :beerchug:

[cyberduderen]

Still no luck with it here are the fault codes it's showing now, any ideas what the problem could be?
I've already changed the engine speed sensor and crank sensor.

VAG-Com Version: Release 409.1-S

Chassis Type: 8D - Audi A4 B5
Scan: 01,02,03,08,15,17,25,35,45,55,56
---------------------------------------------
Address 01: Engine
Controller: 4A0 907 473 D
Component: 2,6l V6 MPFI HS D05
Coding: 00083
Shop # WSC 00001
3 Faults Found:
00513 - Engine Speed Sensor (G28)
03-10 - No Signal - Intermittent
00515 - Camshaft Position (Hall) Sensor (G40)
03-10 - No Signal - Intermittent
00514 - Ignition Point sensor (G4)
03-10 - No Signal - Intermittent
Readiness: N/A
---------------------------------------------


:beerchug:

[Crasher]

They are individually wired to the ECU. You need to check the components wiring from their connectors to the ECU using a multimeter.

[cyberduderen]

Ok I've never used one before but i'll give it a go.
where would be the best place to get one as the prices vary so much.
:D

[cyberduderen]

Would one of these be sufficient http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_16 1428_langId_-1_categoryId_76869

[Crasher]

Yes, that would be fine, all you really need is the continuity tester and a voltage tester. PM me your email address and the cars reg number (again I think) and I will email over the wiring diagram and we can work though the pin numbers.

[cyberduderen]

Did you get my PM mate?

[Crasher]

I can barely access this page and my PM folder not at all, it just will not respond. I think there is something wrong with the forum.