kr88
31-12-2007, 06:16 PM
hello all
im new to this forum! i drive a 2003 vw polo 1.4 when i go to the garage they always use vag-com on my car via a serial interface to diagnose my problem and they also charge a whopping £30 so i decided to buy the cable myself and save on the £30!
i purchased a cable off ebay its the famous one with the blue see through dongle with a blue led. Its not an original one.
its called VAG COM USB KKL 409.1 lead
im using vagcom 409.1 the one that came on the disk and the drivers. The problem is not with connecting the lead to the computer but its the problem of the message 'No Response from Controller'
this is the messgae i get when i test the cable in vagcom.
Port status - Ok
Interface - Found!!!
Type; Serial Pass-through
Opto/Iso - No
Ross Tech Design - No
When I try to connect to anything it says in the top left corner;
Int. Addr. 01, Baud 01, ITE 2
wait 2.0 seconds etc etc
It does that for about 4 times then it says 'No responce from...'
cant get my head around it!!! can anybody help me please? ive tried it with the ignition on, engine on, ignition off, etc etc ive even tried to change from COM 1 to COM 2/4 by applying the changes in device manager and vagcom and it says it can connect to the interface every time but when i click on 'engine module' it wont tell me nothing :(
im running it on a laptop with windows xp SP2, also i do have an after market head unit fitted (pioneer) but it was correctly installed by an professional dealer this should not be a problem as the garage can still use vagcom on it even after the head unit change.
happy new year btw
thanks alot :D
im new to this forum! i drive a 2003 vw polo 1.4 when i go to the garage they always use vag-com on my car via a serial interface to diagnose my problem and they also charge a whopping £30 so i decided to buy the cable myself and save on the £30!
i purchased a cable off ebay its the famous one with the blue see through dongle with a blue led. Its not an original one.
its called VAG COM USB KKL 409.1 lead
im using vagcom 409.1 the one that came on the disk and the drivers. The problem is not with connecting the lead to the computer but its the problem of the message 'No Response from Controller'
this is the messgae i get when i test the cable in vagcom.
Port status - Ok
Interface - Found!!!
Type; Serial Pass-through
Opto/Iso - No
Ross Tech Design - No
When I try to connect to anything it says in the top left corner;
Int. Addr. 01, Baud 01, ITE 2
wait 2.0 seconds etc etc
It does that for about 4 times then it says 'No responce from...'
cant get my head around it!!! can anybody help me please? ive tried it with the ignition on, engine on, ignition off, etc etc ive even tried to change from COM 1 to COM 2/4 by applying the changes in device manager and vagcom and it says it can connect to the interface every time but when i click on 'engine module' it wont tell me nothing :(
im running it on a laptop with windows xp SP2, also i do have an after market head unit fitted (pioneer) but it was correctly installed by an professional dealer this should not be a problem as the garage can still use vagcom on it even after the head unit change.
happy new year btw
thanks alot :D