1.9 TDI Sharan
21-12-2007, 12:22 AM
OK n00b alert...Im downloading the VagCom manual as I type so dont flame me please.....
Just installed my dumb lead and software and ran a quick auto scan and got the following.
VAG-COM Version: Release 409.1-US
Chassis Type: 7M - VW Sharan
Scan: 01,02,03,08,09,15,16,17,18,19,29,36,37,39,45,46,55 ,56
-------------------------------------------------------------------------------
Address 01: Engine
Controller: 028 906 021 GT
Component: 1,9l R4 EDC 00SG 1906
Coding: 00002
Shop #: WSC 00020
No fault code found.
Readiness: N/A
-------------------------------------------------------------------------------
Address 03: ABS Brakes
Controller: 1J0 907 379 G
Component: ABS 20 IE CAN 0001
Coding: 12812
Shop #: WSC 00020
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect.
Controller: 7M0 962 258 F
Component: Multifunkt.Einheit 0001
Coding: 04097
Shop #: WSC 00020
1 Fault Found:
01135 - Interior Monitoring Sensors
35-10 - - - Intermittent
-------------------------------------------------------------------------------
Skipping Address 15-Airbags
-------------------------------------------------------------------------------
Address 17: Instruments
Controller: 7MO 920 920 K
Component: Kombiinstrument 066a
Coding: 00124
Shop #: WSC 77824
3 Faults Found:
00779 - Outside Air Temp Sensor (G17)
29-10 - Short to Ground - Intermittent
00534 - Engine Oil Temperature Sensor (G8)
29-10 - Short to Ground - Intermittent
01039 - Coolant Temperature Sensor (G2)
29-10 - Short to Ground - Intermittent
End --------------------------------------------------------------------------------------------------
Couple of questions.
1, Wht didnt I get a result for each of the control modules it tried to scan? I guess I dont have all of them but 4 out of 18 seems low.
The dash has been playing up so will investigate the sensors shown but how can I get more info on the module 09 fault to pin it down?
Then, just for fun I went on the advanced settings to play...no idea what I was doing but went on the ABS test and it ran through a group of tests, told me to press brake pedal then made some noises ( from the ABS motor??? ) did this 4 times I think, 1 for each wheel and at the end said there was an error....the auto scan shown above says no error....
Finally, how do I get live readings of engine speed, temperature etc etc?
Will go and read the manual now I promise!
Just installed my dumb lead and software and ran a quick auto scan and got the following.
VAG-COM Version: Release 409.1-US
Chassis Type: 7M - VW Sharan
Scan: 01,02,03,08,09,15,16,17,18,19,29,36,37,39,45,46,55 ,56
-------------------------------------------------------------------------------
Address 01: Engine
Controller: 028 906 021 GT
Component: 1,9l R4 EDC 00SG 1906
Coding: 00002
Shop #: WSC 00020
No fault code found.
Readiness: N/A
-------------------------------------------------------------------------------
Address 03: ABS Brakes
Controller: 1J0 907 379 G
Component: ABS 20 IE CAN 0001
Coding: 12812
Shop #: WSC 00020
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect.
Controller: 7M0 962 258 F
Component: Multifunkt.Einheit 0001
Coding: 04097
Shop #: WSC 00020
1 Fault Found:
01135 - Interior Monitoring Sensors
35-10 - - - Intermittent
-------------------------------------------------------------------------------
Skipping Address 15-Airbags
-------------------------------------------------------------------------------
Address 17: Instruments
Controller: 7MO 920 920 K
Component: Kombiinstrument 066a
Coding: 00124
Shop #: WSC 77824
3 Faults Found:
00779 - Outside Air Temp Sensor (G17)
29-10 - Short to Ground - Intermittent
00534 - Engine Oil Temperature Sensor (G8)
29-10 - Short to Ground - Intermittent
01039 - Coolant Temperature Sensor (G2)
29-10 - Short to Ground - Intermittent
End --------------------------------------------------------------------------------------------------
Couple of questions.
1, Wht didnt I get a result for each of the control modules it tried to scan? I guess I dont have all of them but 4 out of 18 seems low.
The dash has been playing up so will investigate the sensors shown but how can I get more info on the module 09 fault to pin it down?
Then, just for fun I went on the advanced settings to play...no idea what I was doing but went on the ABS test and it ran through a group of tests, told me to press brake pedal then made some noises ( from the ABS motor??? ) did this 4 times I think, 1 for each wheel and at the end said there was an error....the auto scan shown above says no error....
Finally, how do I get live readings of engine speed, temperature etc etc?
Will go and read the manual now I promise!