Jaso151
16-04-2019, 10:43 PM
Hi all,
I’m trying to retrofit folding mirrors to my 2014 B8.5 facelift A4, I’ve read many posts and done a good amount of research but have ran into some issues.
I got new door controllers which are exactly like my current ones but an M revision.
SW will be 8T0 959 792M and 8T0 959 793M
HW is currently 8T0 959 793F and 8T0 959 793H. Do I need the P revision despite these modules being ‘highline’? I tried putting my current mirrors in the M revision module but the module doesn’t even control the electrics or indicators. Possibly a faulty module or mismatch of software?
Also, I’m looking at getting mirrors 8K2 857 410 AH and 409 AH, but do the A5 versions work for an A4? (have a breaker friend who has a set for A5)
It also appears folding mirrors are 8-pin instead of 6, is it correct slots 9 and 10 are for folding mirrors (research shows this to be the case for A3’s)
Any help would be greatly appreciated!
Thanks!
I’m trying to retrofit folding mirrors to my 2014 B8.5 facelift A4, I’ve read many posts and done a good amount of research but have ran into some issues.
I got new door controllers which are exactly like my current ones but an M revision.
SW will be 8T0 959 792M and 8T0 959 793M
HW is currently 8T0 959 793F and 8T0 959 793H. Do I need the P revision despite these modules being ‘highline’? I tried putting my current mirrors in the M revision module but the module doesn’t even control the electrics or indicators. Possibly a faulty module or mismatch of software?
Also, I’m looking at getting mirrors 8K2 857 410 AH and 409 AH, but do the A5 versions work for an A4? (have a breaker friend who has a set for A5)
It also appears folding mirrors are 8-pin instead of 6, is it correct slots 9 and 10 are for folding mirrors (research shows this to be the case for A3’s)
Any help would be greatly appreciated!
Thanks!