View Full Version : Vag Com
dana4tdi
28-10-2007, 08:11 PM
I notice from the how to guide that you can use the VAG COM system to change for example the speed locking faciltiy on your car.
How can I get hold of this and make my changes?
onzarob
28-10-2007, 08:17 PM
Have a read on here, www.ross-tech.com (http://www.ross-tech.com) you can but a third party cable from ebay for as Little as £15 and use the shareware version as a start.
If you want to do changes then you need to buy a static license or a genuine cable.
look here www.gendan.co.uk (http://www.gendan.co.uk) but a google search will turn up more suppliers.
dana4tdi
28-10-2007, 08:31 PM
Would this software allow me to do the door speed locking and other things???
onzarob
28-10-2007, 08:35 PM
Shareware with 3rd party lead -read codes only.:D
Registered version with 3rd party lead - read codes and change stuff including anti-hijack...even though I switched it off again because its annoying:biglaugh:
LeanAngle
31-10-2007, 04:50 PM
It sounds like if I'm going to work on this car (2003 A4) myself, I'm going to have to spring for the VAG-COM software.
Do I really need the Hex-USB + CAN version?
I'm guessing that I do since it is the most expensive :biglaugh:
onzarob
31-10-2007, 09:07 PM
I not sure you do as they change around 2004/5 so it may be worth checking your exact car to see which interface it has.
RickT
31-10-2007, 10:41 PM
Would this software allow me to do the door speed locking and other things???
Just to let you know the Shareware version will allow you to do the door locking @ 10 MPH and double click for all doors....
Rick
Spacey885
01-11-2007, 09:57 PM
Hi guys,
I'm looking at fitting cruise contol to my 03 Passat but I presume I need to enable the cruise control using VAG-COM? Will the shareware version allow me to do this?
Also do you think this cable is ok : http://www.virtualvillage.co.uk/Items/007551-001
onzarob
01-11-2007, 10:28 PM
the lead look fine, but eshrules on here does one that will work ;)
on the restrictions look at www.ross-tech.com (http://www.ross-tech.com) for what you can do, i know basic setting and some adoptions are no available ;)
Spacey885
07-11-2007, 08:36 PM
Is there a document that describes all the codes and what they do?
e.g. all the alarms codes, how to enable/disable cruise, enable/disable doors auto lock, etc etc etc
There must be some kind of reference to all the fault codes and how to make changes.
Cheers.
onzarob
07-11-2007, 09:42 PM
http://wiki.ross-tech.com ;)
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.