PDA

View Full Version : Question Camber settings



samiam
09-04-2017, 11:27 PM
#1 Yeti.
I just discovered my front tyres, after a good mileage, badly cut out on the inner edges of each. They are 225/40x19, but that equates to exactly the original size. Both tyres worn the same. Car drives brilliantly.
This begs the question of whether the factory camber spec is a touch too aggressive? How much, if any adjustment can I do. Anyone else out there played around with camber setup?https://uploads.tapatalk-cdn.com/20170409/d26c04ee3c3ce61249556d7bdfd64d0b.jpg


Sent from my iPhone using Tapatalk

Rob69
10-04-2017, 07:14 AM
What makes you think it's the camber that's caused this? I dont think there is any camber adjustment on the yeti, it looks more like excessive toe out. Get the ball joints track rod ends and rack inners checked and a 4 wheel alignment check. How many miles and any steering or suspension parts been changed?

rowdy-999
10-04-2017, 07:27 PM
Incorrect toe destroys tyres not camber.
But if the tyres have done plenty of miles and are at the end of their life it could be completely normal wear.