Faulty parking sensor

[Audi@hbrief]

Hi

Issue with my 2013 q7: parking system sudenly stopped working.

There is a long beep when I shift to revers, and the button is flashing. Also the parking screen is not showing in the mmi. I have checked all the sensors, their all making the clicking sound.

Any ideas? I dont have a vcd :(

[andyhud007]

Welcome,

Sadly, IMO no real way to tell without VCDS or VCP and looking at the fault codes or taking it to a dealer to check it out.

It could be something as simple as a loose wire... but without the codes, its nothing more than guess work

Good luck in your quest

Andy

[Audi@hbrief]

Thanks for your reply. I will check the wires tonight, if it doesnt magicly start working ill order a vcd 👍

[Audi@hbrief]

Ok, so I got this from the auto scan..

1080340 - Parking Aid Speaker
B107C 14 (009) - Open or short to ground

Is it possible to pinpoint which buzzer that is faulty? I guess the q7 has one in the front and one in the back?

[andyhud007]

Send me your VIN and I can look it up (probably)

[Audi@hbrief]

Thanks!

[andyhud007]

Ok, so I got this from the auto scan..

1080340 - Parking Aid Speaker
B107C 14 (009) - Open or short to ground

Is it possible to pinpoint which buzzer that is faulty? I guess the q7 has one in the front and one in the back?

So there are 2 buzzers, one at front and one at back but they are the same Part Number: 8E0 919 279

Here is a couple of PDF's I've exported on where they are located. First one under Steering column, second on the side in the rear seat comparments

Link (https://1drv.ms/f/s!Ag0nrdg-XWqwgYp1h2vNWxfAKz7nTg)

Good luck

Andy

[Audi@hbrief]

Great stuff! Thanks.