View Full Version : Seat Symmetry
andyhud007
20-06-2016, 12:37 PM
Guys
Question for folks with either Driver Side Memory Seat or Driver & Passenger Side Memory seats
In my old 2010 A5 I had Driver Side Memory seat only but both seats were electrically controlled (just like the Q7 4M). One of the options in the MMI was "Seat Symmetry" and you could align the passenger seat with however the drivers seat was currently set.
In my Q7 manual on Page 68 its listed.
30993
Can you guys check if you have it under "Car / Vehicle Settings / Seats" as per pic above? Not sure if they only enable it if you have memory function for BOTH Driver and Passenger seats... which if so, is criminal because it was enabled on my old A5 when I just had Driver Memory function
Either way, I reckon I can find the coding for it... just be good to know if you guys have it.
Cheers
Andy
srbsq7
20-06-2016, 12:58 PM
Hi Andy,
I have driver and passenger memory and I definitely recall seeing that option in the MMI when I was setting the positions for each key a couple of weeks ago.
Have driver and passenger memory, the option is available under passengers seat settings.
(Can't rotate image on my phone for some reason sorry)
30994
andyhud007
20-06-2016, 01:10 PM
Thanks Guys, I think they only "enable" it then if you driver and passenger memory function
JMB7 - Can you use your ODBEleven to see if you can export Modules 06 (Passenger Seat) and Module 36 (Driver Seat) coding for me?
Feel free to PM me
Cheers
Andy
andyhud007
20-06-2016, 01:34 PM
Received, cheers! I'm sure this is a simple one.
pitch3110
20-06-2016, 06:53 PM
Like you Andy I loved this feature in my BE A5 coupe being a bit OC with seats lining up. I was amazed that my equally spec'd up to the hilt BE A6 did not have this feature and it was a real miss.
Obviously being a tight ar&e and not having memory seats (or adv key, have I mentioned this??????) I am living with it though amazed the feature is not included. It was great walking up to th A6 after the missus had used the car and watching the seats all move, the wonders of adv key.......not sure I have mentioned that in the past.
Oh and data USEAGE ....... I'll get me coat.
Pitch
andyhud007
20-06-2016, 08:08 PM
Pitch. I reckon I can get this working for a car that doesn't have mem seats... Working on it tomorrow hopefully..
pitch3110
20-06-2016, 08:58 PM
Pitch. I reckon I can get this working for a car that doesn't have mem seats... Working on it tomorrow hopefully..
Grand.
You our need to point me o the cable and software Andy.
Ta
Pitch
andyhud007
21-06-2016, 04:04 PM
Its a toss up mate between VCDS or VCP IMO.. but some guys here have had luck with ODBEleven which is cheaper (about 60 Euros as I understand) and you buy credits to unlock other features etc.
I used VCDS and VCP for a heap of other stuff though so its personal choice.
andyhud007
22-06-2016, 07:41 PM
JMB7 et al
It only bl00dy works! I now have full passenger seat symmetry to drivers seat and can move passenger seat from drivers side controls with only Driver Side Memory "installed"
Thanks JMB7 for your coding! Thats all that was needed!
pitch3110
22-06-2016, 09:40 PM
shut the front one.............
andyhud007
22-06-2016, 10:30 PM
Gate?
M1tchy
22-06-2016, 11:16 PM
Can you share the coding?
Sent from my iPhone using Tapatalk
andyhud007
23-06-2016, 07:49 AM
Yes I will. It all goes into the coding sticky thread at the top of this forum.
M1tchy
23-06-2016, 01:08 PM
Brilliant thanks
Sent from my iPhone using Tapatalk
satyp
23-06-2016, 02:09 PM
It's blatantly criminal , just hoping it's some Audi Tech NOT carried out due diligence and just left things on default settings :-0
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.