New Q7 running boards

[fusion1966]

Anyone fitted some?

if so, what did you go for and what supplier/make/model did you go for?

[Skippy73]

Yeah I have been looking at these in the Audi Q7 accessories brochure


Sent from my iPhone using Tapatalk

[Skippy73]

Wonder if any third party ones are out yet ?


Sent from my iPhone using Tapatalk

[fusion1966]

Ah didn't look on Audi Uk, will go look now thanks

[Skippy73]

Little picture on there looks good


Sent from my iPhone using Tapatalk

[Skippy73]

30167


Sent from my iPhone using Tapatalk

[fusion1966]

Just had a call from my local Audi dealer stating that they aren't for sale yet and won't be until later this year or early next year



30167


Sent from my iPhone using Tapatalk

[dghdgh]

The q7 that got car jacked had them on! looked good, I ve noted some on eBay have them listed as fitting the new model.

[andyhud007]

Yep, I've been looking for some for the new Q7 (4M) model too... Its a shame they arent available yet from Audi. I'd rather get OEM ones than the ones I've seen on Ebay, can never be sure how good they are.

[elrao]

My dealer just confirmed these are available for order, £1495. So 3x the price of the ones from eBay (£550 fitted).

[andyhud007]

Thanks Elrao

Can your dealer confirm the Audi Part Number and do they have a current ETA on delivery?

Does anyone have any better pics of them? Pretty pricey, but thats expected I guess

Cheers

Andy

[elrao]

Afraid not, just a price and that they were available "now". Didn't know if that was to order along with my new Q7 (Aug delivery) or more generally available.

[elrao]

Place selling the on eBay is not that far from me (Romford), have emailed them to ask for photos of their product installed. At £399 (£550 delivered) they are undoubtedly better value, looks a fairly simple bolt on too (my local garage would probably fit for £20 if it is as simple as putting up on the ramp and bolting them on...).

[andyhud007]

Afraid not, just a price and that they were available "now". Didn't know if that was to order along with my new Q7 (Aug delivery) or more generally available.

No worries, would it be cheeky to ask if you could find out the part number?

Cheers

Andy

[elrao]

Can ask, can't promise a reply!

[andyhud007]

Can ask, can't promise a reply!

:biggthump

[dghdgh]

£150 for delivery, just got to sit down and take a breath.
Place selling the on eBay is not that far from me (Romford), have emailed them to ask for photos of their product installed. At £399 (£550 delivered) they are undoubtedly better value, looks a fairly simple bolt on too (my local garage would probably fit for £20 if it is as simple as putting up on the ramp and bolting them on...).

[elrao]

Sorry, 399 delivered and 550 installed.

[dghdgh]

Few.

[andyhud007]

Sorry, 399 delivered and 550 installed.

Link (http://www.ebay.co.uk/itm/AUDI-Q7-SIDE-STEPS-RUNNING-BOARDS-AUDI-Q7-NEW-SHAPE-2016-SIDE-STEPS-OEM-FIT-/152016731758?fits=Model%3AQ7%7CPlat_Gen%3A4M&hash=item2364e73e6e:g:OaIAAOSwr7ZW6EDk)

[elrao]

Link (http://www.ebay.co.uk/itm/AUDI-Q7-SIDE-STEPS-RUNNING-BOARDS-AUDI-Q7-NEW-SHAPE-2016-SIDE-STEPS-OEM-FIT-/152016731758?fits=Model%3AQ7%7CPlat_Gen%3A4M&hash=item2364e73e6e:g:OaIAAOSwr7ZW6EDk)

Those are the ones, if I get any images of them on a car I will post them up.

[Q7newbie]

Has anyone ever seen black running boards? Be it originals or painted ones? I'll be sure to get a set, but not in silver like the ones in the pic as they'd ruin the all black look of the car.

Sent from my SM-N910F using Tapatalk

[dghdgh]

Anyone thought of a group buy for the ones on EBAY or suggest they become a club sponsor or offer club discount. Not sure how all of this works within the rules.

[andyhud007]

Anyone thought of a group buy for the ones on EBAY or suggest they become a club sponsor or offer club discount. Not sure how all of this works within the rules.

Did that once before for some door sills when I was part of a Honda club about 10 years ago, it worked well but yes not sure of the clubs rules here specifically.

That being said, I want to see the OEM ones first as I'm keen to know the quality of them vs Aftermarket ones despite the cost difference

And yes Q7Newbie, black also for me.

Andy

[elrao]

Am down at the dealer tomorrow to sign the paperwork on my order, so will see if I can get any more info from them face to face. The place on eBay is not far from me either, had an email reply back saying they haven't fitted a single pair yet (didn't ask if they had sold any); just meant they had no photos of any on a car.

I left the OEM ones off the order, as I am sure I can get the same 10% discount buying them once the car has arrived.

[andyhud007]

Let us know how it goes Elrao and if you can find out Part Number etc...

Can only assume the ebay ones have come from abroad somewhere... just never know on the "quality" of them...

Let us know what you find. Cheers!

[Papereyes]

Was looking at the Audi German website to see if the new my2017 options are out. Interestingly they now sell running boards at 1000eur which I suspect will be around 800gbp for us in the uk. Enclosed picture if people are interested http://uploads.tapatalk-cdn.com/20160404/30c280f2a17169031727166adb7cbb3c.jpg


Sent from my iPhone using Tapatalk

[andyhud007]

Thanks Papereyes. this was discussed in another thread also. I'm trying to find the Audi Part Number for these. Do you know it?

Thanks

Andy

[Papereyes]

Trying to brush up on my school boy German. If not I'm over in Berlin soon so can pop down the Audi dealer over there and ask them


Sent from my iPhone using Tapatalk

[andyhud007]

Cheers. Likewise!

Looking through the configurator on the Audi DE site they get more options than us (Homelink / Remote Heating / Running Boards) were 3 I spotted.

I've got ETKA (Audi's internal Parts system) and I'll try to spin it up and find the part number that way also.

[Papereyes]

Spoke to Audi German online, they said they don't have the parts catalogue which is only held with dealers


Sent from my iPhone using Tapatalk

So I've emailed the nearest dealer to my office in Berlin to see if they can give me the part number


Sent from my iPhone using Tapatalk

[Papereyes]

Dealer in Germany days they can't give out the part number but only the price. So annoying!


Sent from my iPhone using Tapatalk

[andyhud007]

What the??? Weird... I'll keep hunting.. cheers!

[Papereyes]

Yeah I suspect they think if they give the part number, I'll go and try and find a cheaper price elsewhere


Sent from my iPhone using Tapatalk

[andyhud007]

Yeah I suspect they think if they give the part number, I'll go and try and find a cheaper price elsewhere

Well yeah, obviously :drive:

[andyhud007]

Also to note, they say (once you translate from German)

"Note : not available in conjunction with all-wheel steering"

[Papereyes]

Billocks, ordered the all wheel steering as an option on the car. Annoying as I wanted both, wonder why you can't fit it.


Sent from my iPhone using Tapatalk

[andyhud007]

can only assume the rear wheel turning circle you get with all wheel steering... I'm no expert but its a hunch.

[elrao]

Was considering adding AWS, but as it was going to cost me £2k (required an upgrade to 21" wheels), I was unsure. If it will also cause problems with running boards then I'll swerve it for sure.

[andyhud007]

Ok, I've found the part numbers

Details below.

3034530346

The image looks like the old Q7 but this does seem to be the new one.

[elrao]

Is that all the parts do you think? £1495 installed is a pretty big installation charge!!

[andyhud007]

Seems to be yeah, it doesn't link to any other required "parts/pre-requisites).

At the very least you have the part numbers for the running boards themselves. A dealer with a better knowledge of the system (than I have) will probably know what else, if anything, is required. but I'll double check again today

Andy

[Skippy73]

My range river sport when I had it I was able to install it myself very easy as the threaded bolt holes were already there. Wonder if the Q7 would be the same. If so I would just put them on at home myself.

Sent from my SM-G935F using Tapatalk

[andyhud007]

Yup, me too... the missus has taken the car today so I can't look underneath to see if there is anything there... anyone care to check? :Blush:

[t1sh]

I have no idea how all wheel drive will actually stop installing the running boards. But hey, I am not an Audi engineer to argue that. I will wait and see! 1495 pounds for them is far too much. Perhaps after some time I could get much cheaper set here in Poland.

[elrao]

Also to note, they say (once you translate from German)

"Note : not available in conjunction with all-wheel steering"
Can you let me know where you saw this. Having the conversation with my dealer at the moment about compatibility between running boards and AWS. They are supposed to have an answer for me tomorrow, which is when my spec amend window closes.

Given I was told my car would be August delivery, seems early to close the amendment window! They did ask if I wanted to cancel that order and reorder...no doubt wanting the extra £700!!!

[Q7newbie]

I've just seen the warning too, that AWS and the Running Boards can't be selected together. 😕

Sent from my SM-N910F using Tapatalk

[Papereyes]

Was thinking if it could be the aws impacting the sections where you bolt on the running boards under the car?


Sent from my iPhone using Tapatalk

[t1sh]

That will be pretty strange. But you might be right.

[Papereyes]

Yeah, only thing I can think of as the boards look flush to the wheel arches so couldn't see how the wheels interfere with the boards. (Would be good for Audi to explain)


Sent from my iPhone using Tapatalk

[Q7newbie]

I'm sure in a few more months some ingenious entrepreneur will see this gap in the market and make a set of running boards that will look identical to oem but will work with AWS!

Sent from my SM-N910F using Tapatalk

[andyhud007]

I sent the part numbers to my dealer (nothing like helping them along a bit, lol) and this is their response just now back via email

"Thanks for sending this through. I have checked with our parts department and the running boards are not available for order yet. They are hoping to know something in the next few weeks. They have registered their interest already! (As soon as it was noted as an option on the factory cars they did this)."

[Papereyes]

Can anyone provide shots of the underside on a non aws and aws vehicle?


Sent from my iPhone using Tapatalk

[andyhud007]

I can do mine tonight (non-AWS) when the missus gets back

[elrao]

I got my dealer to check the running board / AWS situation and they also confirmed the two were not compatible (they actually said running boards were not compatible with 21" wheels and AWS; but that is probably as I was thinking of adding both 21s and AWS to my order).

Have left the AWS off as a result. No idea if the 21s got added or not, as my salesman is off and the chap he left in charge hasn't responded. Last thing I heard was that if I made any changes, it would be based off the new pricing structure, which would mean removing accessories would cost me money.

[Papereyes]

Really that sounds harsh? Thought if u added on changes you would be charged at the new rate, but removing options shouldn't cost u.


Sent from my iPhone using Tapatalk

[Skippy73]

Ok so I am definitely getting good running boards. My build is week 15 so next week so should have the car in 3 weeks. I have found non genuine running boards in China in stainless steel have a look at this link

http://www.winforauto.com/en/Product.asp?Bid=354

They even have electric folding running boards. And a few body kits. Have a look very interesting.

I also stopped into audi today and took photos of under their display Q7 to check I can fit these myself. All looks good.

Sent from my SM-G935F using Tapatalk

[Papereyes]

Can you post the photos of the underside? Would be good to get comparative shots of one with AWS (any volunteers)?


Sent from my iPhone using Tapatalk

[Skippy73]

http://uploads.tapatalk-cdn.com/20160407/0d83b3b5962ee56ccb2df0d2d38d38df.jpg

http://uploads.tapatalk-cdn.com/20160407/1f20f003d9e83217f53fc443ea45943a.jpg

These 2 photos show blocks under the q7 but I wonder if these are jack points for tyre changing?

Sent from my SM-G935F using Tapatalk

[Skippy73]

http://uploads.tapatalk-cdn.com/20160407/14df55985e7af3fdb2b35e127d10c3ba.jpg

Notice in this photo of how the running board brackets fit..

Sent from my SM-G935F using Tapatalk

[Skippy73]

Also these are the running boards for Q7 M4 notice the long rubber non slip parts. The old q7 running boards have 4 or 5 patches of rubber very different. Again this website shows the correct boards

http://automobilespareparts.m.sell.everychina.com/p-104775687-audi-new-q7-2016-vehicle-running-boards-non-slip-stainless-steel-side-step.html



Sent from my SM-G935F using Tapatalk

[elrao]

Also these are the running boards for Q7 M4 notice the long rubber non slip parts. The old q7 running boards have 4 or 5 patches of rubber very different. Again this website shows the correct boards

AUDI New Q7 2016 Vehicle Running Boards Non - slip Stainless Steel Side Step - automobilespareparts (http://automobilespareparts.m.sell.everychina.com/p-104775687-audi-new-q7-2016-vehicle-running-boards-non-slip-stainless-steel-side-step.html)



Sent from my SM-G935F using Tapatalk
The ones on eBay (stating they are for 4M) are the same style as the ones for the old model (i.e. 5 patches of rubber). These ones do look more like the OEM ones. As the company selling them on eBay told me they hadn't actually fitted any of these yet (didn't ask if they'd sold any) they don't have any photos of them on a car, which makes me think the photo on their eBay advert is an old Q7 with old style boards!

Would be tempted to import 5 sets from china if 4 other people were interested. I have emailed them to ask for a price.

[Skippy73]

I was thinking the import option. I was thinking fit one set to my car. Take photos (as there are none out there yet) and then sell the other 4 sets. Patch rubber is older model. If you look at the audi Q7 M4 accessories brochure it shows the longer rubber strips.

Sent from my SM-G935F using Tapatalk

[Skippy73]

http://uploads.tapatalk-cdn.com/20160409/cee455a8f6b889706658557ed669d998.jpg

Photo of the audi genuine ones from brochure are same as the China ones I have posted above

Sent from my SM-G935F using Tapatalk

[sm02fly]

I'm interested in a new 4M spec once prices are known.

[t1sh]

Yesterday, I tried to configure Q7 on Audi.de and I added the running boards. Once I added all wheel driving sand were removed automatically. So either running boards of all wheel drive! Pity!

[andyhud007]

Just came across these by chance

Side Step fit for AUDI Q7 2016+ Running Board Nerf Bar Fashionable Refitted | eBay (http://www.ebay.co.uk/itm/Side-Step-fit-for-AUDI-Q7-2016-Running-Board-Nerf-Bar-Fashionable-Refitted-/152044298889?hash=item23668be289:g:UokAAOSwjwlXBRA u)

Not exactly a great "look" in my personal opinion, but at least some pics of a new Q7 with some form of running board fitted!

Andy

[Skippy73]

This is interesting Andy. I think I would buy these and would look good on my black Q7. The main reason for the running boards for me is to stop car doors damaging my parked car and as a bonus achieve a good aesthetic look.

What I like about the listing is you can clearly fitted these yourself without having to drill or modify the car. This indicates that the Q7 does come with holes pre drilled for running boards as did my Range Rover when I fitted running boards to that myself.

So in theory you should be able to buy the Audi genuine ones and fit yourself

But for my money on a lease car these look good.


Sent from my iPad using Tapatalk

[andyhud007]

Ok, keeping this in right thread

Now that MY17 is out the parts system has been updated. Here you go

These product codes apply for Q7's (4M) with Air Suspension or standard Steel Suspension


30573

[Skippy73]

Ok, keeping this in right thread

Now that MY17 is out the parts system has been updated. Here you go

These product codes apply for Q7's (4M) with Air Suspension or standard Steel Suspension


30573
Ouch 900. The part number say only with air suspension? Is it a different part number for steel springs?

Sent from my SM-G935F using Tapatalk

[andyhud007]

see above :o

[elrao]

17.5% VAT, I wish ...

Do you know what the "use in conjunction with D ..." is for, possibly the mounting hardware?

[andyhud007]

Nope, I dont know sadly. I've looked around and thats literally all the info. The only of thing is this (in German) which when translated still doesnt make any sense

30574

I also rang my dealer parts dept and another dealer I've never dealt with and they both said not possible to order yet. Last update was 4th April 2016 from Audi.

He has a list of folk who want them so has added me to the list, and so they all therefore must have MY16 cars. I'm going to go outside and have a look under the car in a mo for any mounting locations. I've heard they literally bolt-on, no drilling etc required.

[dghdgh]

What gets me is they sell them side by side, who would want running boards on one side? I can see the need for accident repairs etc but I would expect a pair to be cheaper than a single unit.

[satyp]

Looks Like EEEVRRRYYYYYBODY want running boards..... :biglaugh: .. & it was the 1st i asked at the Silverstone Q7 launch and after ALL that waiting - I can't have THEM just because I DO NO WANT give ALL WHEEL STEERING!! :aargh4:

[srbsq7]

I don't want running boards. Or maybe I do and I just don't know it yet?


Sent from my iPhone using Tapatalk

[Papereyes]

I thought I didn't until I read on here they help protect against other numpties car doors slamming into yours. However I still think all wheel steering is more essential to me so have no choice to forgo. Still want to know why you can't put running boards on a car with aws


Sent from my iPhone using Tapatalk

[satyp]

I've looked at some of the pictures of the RUNNING BOARDS on the New 4M Q7 2015... It doesn't do as much justice as it did on the outgoing Mk1 unfortunately..

So willing to give it a miss.. Besides will only ever need them put bikes on the roof rail.. I'm sure it will ruin any fuel economy on environmental side of things...

Also wondering why the Audi brochure shows only the low side view of the boards and no full on pic with the boards on as yet.. Maybe a marketing trick..

I'm sure it look better once the tweak the body in years to come or the coupe Q8

Will stick with the ALL WHEELL STEERING with this Q7

Sent from my LG-H961N using Tapatalk

[andyhud007]

Each to their own, I think I want a set to go with the overall look of my car. I dont have AWS but I really want to see a set fitted before I take the plunge. Mind you, you can't even order them yet so its a moot point right now. lol

[Nemo78]

I thought I didn't until I read on here they help protect against other numpties car doors slamming into yours. However I still think all wheel steering is more essential to me so have no choice to forgo. Still want to know why you can't put running boards on a car with aws


Sent from my iPhone using Tapatalk

I want them more for the little ones...so they have something to put a foot on and not fall out the car...also helps when washing the roof [emoji23]

@andy tried my dealers also on way home and exactly same message as per your post above

[sm02fly]

Also helps protect the seat bolster as less pressure while sliding over it getting in/out.

Maybe not to as great an extent as in a Range Rover/Disco etc, but I've seen a few of them without running boards and ripped seats.

I want them to help the kids and as a bump protector also.

[satyp]

Well ..

Not the current Audi Spec.. but gives a fair picture..

can't make my mind up.. but falling bit on the meh!! side @ the mo..
Side Step fit for AUDI Q7 2016+ Running Board Nerf Bar Fashionable Refitted | eBay (http://ebay.eu/1TsNZeH)


hmmm! dunno really???
305773058030581305783057930580

[satyp]

must be the Side quattro blades or something..

without the old

Side quattro blades - The Old Q

30582

[satyp]

I didn't find the old Audi Original boards help much with stoppin (careless) folk from denting the door panels of the old Q7 .. PAID a sum to get 'em sorted before selling it though.. Guess you can't escape in places and areas.. GOING TO WING ON DENT/SCRATCH insurance this time round £10 excess and no where near the quotes to fix them over three years, hopefully works out this time round..

[andyhud007]

I don't like the ones above that you can get on eBay. I just want to see the genuine audi ones on a real car. It will help make the decision. Argghhhh

[andyhud007]

Asked my dealer for an update on when these can be ordered yesterday.. still no news.. he said try again in 2 weeks.

Found this install pic though in the workshop manuals.

30762

[Papereyes]

I wonder if the running boards overhang into the rear wheel (hence you can't have all wheel steering wih running boards)


Sent from my iPhone using Tapatalk

[Thakey17]

I had a real result. I received an email last week giving my order MY17 status, so I deleted the Ambient Light Pack and Pan Roof and added the style pack. Now got the running boards for £200 extra!!!!! Happy with that.:biglaugh:

[Papereyes]

Nice, did u manage to avoid the 700gbp price increase from my16 price to my17


Sent from my iPhone using Tapatalk

[elrao]

When I tried to upgrade the Pan Roof in MY 16 specced and priced car that is also an MY 17 order, I was told the whole cat would be repriced on MY 17 prices, so instead of +£500 for the style pack it was +£1,085 as there was the £700 increase in the MY 17 model, £500 for style pack over pan roof, but £115 off as the 85 litre tank is standard on MY 17 which I'm paying for!

[elrao]

And it would likely push my order out from week 26 by about 4 to 8 weeks.

[Thakey17]

Nice, did u manage to avoid the 700gbp price increase from my16 price to my17


Sent from my iPhone using Tapatalk

No base price increase from my dealer as I'd ordered it as a MY16. My build week is around week 31 so I always knew I'd get the upgrade. I'm sure there is a statement on another thread saying that Audi will wave any increases for orders updated to MY17 from MY16. I threw that at the dealer and he was fine with that. Just today signed to new order form and all is correct, base price is the same. I also managed to add the Black Styling Pack.

[Thakey17]

I'm sure there is a statement on another thread saying that Audi will wave any increases for orders updated to MY17 from MY16.

Got it..... See below statement regards price holds on changed orders.

Audi UK will start to convert orders to MY17 specification when all production has been filled for MY16 (up to and including week 21). This may vary from model to model because of production weeks and lead times. Wherever possible, customer orders will be built as MY16 if ordered as MY16. Where it is not possible to build an MY16 vehicle the order will be converted to MY17 and any adjustments to optional specification will be made on a car-by-car basis to secure the best value for the customer. Centres should check customer orders that have been converted and flag any discrepancies before the vehicle is confirmed for build with the sales office.
Any demonstrator, showroom and stock orders (order types 05, 06, 07) that are on wait list will be deleted from the system. Customer order types on wait list (order types 00 to 04) will be converted to MY17 but will remain on the wait list until the Centre has available quota.
Price protection
Retail orders: Customer-tagged orders submitted as MY16 will be price-protected at the existing retail price if built as MY17. Any new retail orders for the above models ordered as MY17 will have the new retail price.

[elrao]

Maybe your dealer is absorbing the price difference? What sort of discount did you get initially?

Maybe mine is being tight.

[Thakey17]

I'd rather not say about the discount but it was acceptable. It was a price match against a broker site. When I sent through the list of changes and what I expected the new pricing to be without the increase, I was only £200 out, they said to me that all discounts were based on the car price excluding the delivery costs. To be honest for £200 in the grand scheme of things I did't question it and just signed it all off, but the new order form 100% has the same base price as before.

[elrao]

Mine was matched to carwow, not the cheapest broker site, but you at least know who the dealer is unlike some others.

Ive asked my dealer again about style pack, as I'm wk 26 and yours is 31 that's probably why your week isn't impacted but mine would move out.

[Thakey17]

Same site..... I too didn't feel comfortable with other brokers. With this deal/price match, I get to deal with my local dealers 5 mins away. Are some of the other prices out there too good to be true. There was a comment before on another thread about taking a small hit on the discount to go local and I totally agree. I think you get treated better by them if local.

Regards the increase, just bear in mind that if you've already spec'd Smartphone interface then you can delete it as it's standard on MY17 meaning your increase is only £350 not £700.

[elrao]

Same site..... I too didn't feel comfortable with other brokers. With this deal/price match, I get to deal with my local dealers 5 mins away. Are some of the other prices out there too good to be true. There was a comment before on another thread about taking a small hit on the discount to go local and I totally agree. I think you get treated better by them if local.

Regards the increase, just bear in mind that if you've already spec'd Smartphone interface then you can delete it as it's standard on MY17 meaning your increase is only £350 not £700.

Didn't spec the smartphone interface, No - but did spec the 85L fuel tank which is now standard, so it's a ~ £585 increase for me (without discounts).

[satyp]

[QUOTE= the 85L fuel tank which is now standard, so it's a ~ £585 increase for me (without discounts).[/QUOTE]

I didnt know the 85l tank was standard.. Had ticked it for appx 115 I think..

In any case, possibly something iffy about the whole thing.. Why was it not offered standard in the 1st instance?.. After such long R&D.

I guess the reason I say this is because a lot of Audi forums out there say that nearly never get anything close to 80L let alone 85L even with reserve.. A lot of theories about a tank will never get empty etc but why advertise as 85L then... 😒 hmmm is got me curious..

What's worse is YOUR AUDI build also lists as max 75l.. As per pic Not sute it`s another oversight/bug????...

But wishing things were a bit more straightforward as opposed to always wondering it`s one ☝ way or another 😣http://uploads.tapatalk-cdn.com/20160525/a4c5c19773361e377adf83b6490c132c.jpg

Sent from my LG-H961N using Tapatalk

[elrao]

Looks like it is technically an option ... but a FREE option.

30765

Unfortunately for me, my discounted price was agreed based on the spec with this included as a £115 option. My order form now shows this as a free option (price £0.00), but the discounted price was not reduced as a result, so basically my discount is not what it should be (as we agreed a %!).

[satyp]

Looks like it is technically an option ... but a FREE option.

30765

Unfortunately for me, my discounted price was agreed based on the spec with this included as a £115 option. My order form now shows this as a free option (price £0.00), but the discounted price was not reduced as a result, so basically my discount is not what it should be (as we agreed a %!).



Well , at least let's hope you you get something close to the advertised 85L fuel and 24l Adblue on the now free option

[elrao]

For me "yourAudi" does list the 85 litre tank, under "Equipment Packages", but then does also say 75 litres under tech specs (which I assume is the standard, without the "FREE" option)

30769

[Papereyes]

Elrao. Suspect I will be in the same boat as you, escalated to Audi executive team to see if they could waive the 700gbp price increase as I wanted to change steering wheel. Basically got told its up to the dealer and given discount I got they wouldn't waive this. I'll try and see if I can get this option added with the dealer tomorrow (but not hopeful)


Sent from my iPhone using Tapatalk

[elrao]

My dealer just advised that running boards are now available to order.

Unfortunately this was after telling me my car moved to confirmed status last week, so can't be changed (he sent me a photo of his screen showing it was 20)


The API behind yourAudi still shows status 10, but then it also shows a status date of 30th March ... so doesn't look like this is always reliable:

{
"responseInfo": {
"code": 0,
"desc": "Success"
},
"data": {
"orderNumber": "",
"orderStatus": "10",
"deliveryDealerCode": "00551",
"orderHistory": [{
"orderStatus": "10",
"statusDate": "2016-03-30T01:08:56+0100"

[andyhud007]

Interesting thanks! I'll ring mine and see if they are orderable too. Cheers

[Skippy73]

Interesting thanks! I'll ring mine and see if they are orderable too. Cheers
Let me know Andy

Sent from my SM-G935F using Tapatalk

[andyhud007]

Just spoke to my dealer. Their computer system is down right now but he said he did see an email saying that yes they are available to order now. Apparently Audi were waiting to see "what demand was like"

He is going to call me back with prices/timelines etc when he computers are working again.

[Papereyes]

Andy if u speak to ur dealer reckon u can ask if he has any info on why it can't be used with AWS?


Sent from my iPhone using Tapatalk

[satyp]

Andy if u speak to ur dealer reckon u can ask if he has any info on why it can't be used with AWS?


Sent from my iPhone using Tapatalk
Yep it should be a very interesting answer.. Depending on what training the master techs have had on germany.. I'm braced up for various reponses [emoji6] [emoji50]

Sent from my LG-H961N using Tapatalk

[andyhud007]

I just talked to the "Parts Guy".. I'm not pinning much hope on him knowing why they can't be used with AWS but hey.... no harm in trying!

[srbsq7]

Be interesting to see what they look like on. Hoping not to my taste else another £1k gone!

[Papereyes]

I tried Audi executive team and gave me a waffly answer which ultimately meant "computer says no"


Sent from my iPhone using Tapatalk

[elrao]

My money would be that one of the parts of the AWS is located where the rear mount is supposed to go.

[Skippy73]

My money would be that one of the parts of the AWS is located where the rear mount is supposed to go.
That's my bet too

Sent from my SM-G935F using Tapatalk

[andyhud007]

I'm concerned that they are running boards in silver and as my whole car is black including wheels it may look odd.

[Q7newbie]

I'm concerned that they are running boards in silver and as my whole car is black including wheels it may look odd.
I have to agree. Silver running will look quite garish considering your car is all matte black... You probably will have to get them sprayed 1st before fitting.

Sent from my SM-N910F using Tapatalk

[andyhud007]

Its a tough call, I dont want to ruin the look of the car, but want the extra "add" of running boards. Its like I need them wrapped too.

[elrao]

Anodised black before fitting?

[Q7newbie]

Paint or anodised for sure. I doubt wrapping them will give you the kind of long term durability and quality needed for running boards.

Sent from my SM-N910F using Tapatalk

[Nemo78]

I just talked to the "Parts Guy".. I'm not pinning much hope on him knowing why they can't be used with AWS but hey.... no harm in trying!

Did you manage to get a price?

[andyhud007]

Nah not yet. They didn't come back to me. Guess Monday now

[andyhud007]

I'm thinking anodised too now...

[Nemo78]

£459 each side plus £180 fitting each side - apparently the underneath doesn't have pre drilled holes and on the showroom car it took them 2hrs each side to fit [emoji15]

[elrao]

That's not far off what my dealer quoted months ago (£1495). Hopefully the MY 17 will have holes.

Have they sent you any photos of the showroom car with them fitted?

[Nemo78]

That's not far off what my dealer quoted months ago (£1495). Hopefully the MY 17 will have holes.

Have they sent you any photos of the showroom car with them fitted?

Not yet...I have asked the parts guy to email it across

[Q7newbie]

Do you guys think getting running boards fitted via a 3rd party on a car with AWS would be some breach of product or invalidate some kind of warranty?

Sent from my SM-N910F using Tapatalk

[andyhud007]

Ouch.. thats a lot of dollar... and I need to get mine anodised...

Q7N.. I reckon it may breach warranty but thats my own personal opinion

[andyhud007]

weird, just had voicemail from another dealer I was querying about running boards and he said that they dont fit the earlier Q7 4M cars... yet my other (main dealer) hasnt said that.. or they havent checked...

and apparently there is no way to fit them

EDIT: Maybe this ties in with Nemo's comments about 2 hours to fit them as holes dont exist on the earlier cars? Nemo, can you do some checking what version the car in the showroom is they did it on and if this marries up with what your dealer found?

[elrao]

There won't be any my17 cars in any showroom just yet surely, as we are only a week past the changeover week (it's currently wk23 I think)

[andyhud007]

I hope your right Elrao, that was my thinking which means I guess they can be fitted with a bit of work to MY16s

[Nemo78]

Right Andy I called up again and spoke to a different guy. Turns out they haven't actually fitted them.

However he did say looking at registration the running boards are for MY16 as well but to be 100% needed chassis number but I didn't have that to hand

[andyhud007]

Thanks Nemo. The more we look into this I think the older cars could 'probably' have them fitted with a bit of work but newer cars may have the holes ready from the factory.... That's my hunch..

[satyp]

So cars delivered after which date would need to confirm re: these holes Feb/March - May/June..

Sent from my LG-H961N using Tapatalk

[JMB7]

The third party running boards advertised on eBay stated that everything needed to fit was included and no drilling required didn't they? They were up long before my17 models were announced. Not sure how they were fitted then.

[satyp]

Indeed.. Time will surely tell I guess

Sent from my LG-H961N using Tapatalk

[satyp]

Maybe those taken delivery in the last few weeks get “dig (kneel) a little deeper and kill the curiosity..

A torch 🔦 a possible service template from the net and some free time I suppose

Sent from my LG-H961N using Tapatalk

[satyp]

Have seen a picture somewhere before of where to look for these holes ..wasn't sure if it was for the 4M though.. Will try a and find it again 👀..

Sent from my LG-H961N using Tapatalk

[andyhud007]

Any joy Satyp?

Nemo - Did your dealer say the boards will be fitted to an older 4M? Any pics?

[satyp]

Any joy Satyp?

Nemo - Did your dealer say the boards will be fitted to an older 4M? Any pics?
Nah Andy.. No joy as yet, I normally save any New Q7 pictures to an Album on Google Photos and any researched links related to the New Q7 & various Car related projects notes on Evernote or Chrome and I'm still not organised :-(0

Thinking it might have been YouTube video

Irritating sometimes when you only find it when your not looking for it..

Will keep this post updated ..

Sent from my LG-H961N using Tapatalk

[andyhud007]

I know the feeling mate. My Q7 folder on my laptop is all over the place.

No worries, appreciate you keeping tabs on it.

[Nemo78]

Nemo - Did your dealer say the boards will be fitted to an older 4M? Any pics?

Nothing yet as I haven't been able to re-ask...will try next week [emoji1360]

[andyhud007]

Thanks for update mate. Appreciate you checking it out

[Sandy100]

The audi approved boards are finally on!! Arrived this week and have taken two days to fit rather than the budgeted 3hrs per side (apparently it's a 48 page install guide!) pleased to finally have them on!
30941

[andyhud007]

Thanks Sandy! How old is your car? Do you have any other pics??

Was it a UK dealer??

[Skippy73]

The audi approved boards are finally on!! Arrived this week and have taken two days to fit rather than the budgeted 3hrs per side (apparently it's a 48 page install guide!) pleased to finally have them on!
30941
I am literally so jealous

Sent from my SM-G935F using Tapatalk

[Sandy100]

We've used audi York for a while, have been really good. The boards just came in this week, I've been waiting a while for them. I don't think fitting was easy, car was new in April - a few more photos attached
3094330944

[Nemo78]

Thanks Sandy...

Andy I think this leans more towards the drilling holes required?

Either that or the screwing in locations are hard to get to/reach?

[Skippy73]

Did they charge you extra because it took longer Sandy??

Sent from my SM-G935F using Tapatalk

[Q7newbie]

They are now a definite "must have" now. Audi are sooooo STEWPID for not making this available from launch.
Considering most 4L Q7s had them. Why miss out on making extra money from early orders?
Because I'm pretty certain that a large chunk of owners who already have the Q7 will go get them retrofitted by a 3rd party who will charge less than Audi.

Sent from my SM-N910F using Tapatalk

[Sandy100]

No they worked it out, I'm guessing from the time taken they haven't pre-drilled holes which is odd.

[Skippy73]

It is odd as if you purchase the non genuine ones that are for sale it states no drilling needed. But I thing there are plastic moulding that have to be removed and maybe cut perhaps to get to the pre drilled amd threaded holes. Just a guess though

Sent from my SM-G935F using Tapatalk

[andyhud007]

Hey Sandy. Is it possible you can take pics of the underside so we can get an idea of how they are fitted?

[Sandy100]

it's a shocking picture, but it's the only one that half came out, my wife is away in the car for the week- sorry, hope it helps
30956

[Nemo78]

Okay so it seems like the MY16 cars have a plastic moulding underneath the car which needs to be removed and cut to allow the fitting of the running boards.

The MY17 cars mouldings should come in the right size straight from factory.

So can be fitted but requires dealership to know what needs doing on the MY16 cars

[andyhud007]

Interesting Nemo, thanks.. Have they fitted any to a MY16 car yet ?

[Nemo78]

Interesting Nemo, thanks.. Have they fitted any to a MY16 car yet ?

Not yet - not sure what the parts guys was
Thinking when he told me that they had!

[andyhud007]

yeah, part of the reason I asked .. lol

Be great if we could understand this plastic moulding stuff a bit more. Do they imply the holes are in the metal sections of the car then for the boards, but hte plastic moulding over the top needs cutting and putting back to get to the holes in the metal?

or is it the holes need cutting in the plastic and the metal frame of the car?

I know I know... I'm a pain...

[Nemo78]

yeah, part of the reason I asked .. lol

Be great if we could understand this plastic moulding stuff a bit more. Do they imply the holes are in the metal sections of the car then for the boards, but hte plastic moulding over the top needs cutting and putting back to get to the holes in the metal?

or is it the holes need cutting in the plastic and the metal frame of the car?

I know I know... I'm a pain...

Not sure I will try and find out...

[andyhud007]

Cheers Bud, I've relayed this "plastic moulding" conundrum onto my dealer about getting the boards fitted to mine and so will see what happens. I'm going to get under the car this weekend and have a proper snoop about.

[andyhud007]

Interesting

Audi Q7 4M January onwards 2016 Running Board Foot Side Step GENUINE AUDI SET | eBay (http://www.ebay.co.uk/itm/Audi-Q7-4M-January-onwards-2016-Running-Board-Foot-Side-Step-GENUINE-AUDI-SET-/262500525949?hash=item3d1e40277d:g:ODEAAOSwZ1BXcUk x)

[Nemo78]

Interesting

Audi Q7 4M January onwards 2016 Running Board Foot Side Step GENUINE AUDI SET | eBay (http://www.ebay.co.uk/itm/Audi-Q7-4M-January-onwards-2016-Running-Board-Foot-Side-Step-GENUINE-AUDI-SET-/262500525949?hash=item3d1e40277d:g:ODEAAOSwZ1BXcUk x)

Wonder why it makes particular reference to January....what changed?

[elrao]

Have you contacted them to ask any questions (like if fitting hardware is included etc). Assume that has to be price for a pair and that they just copied the info from the system about the right side board!

[Nemo78]

My guess is that is price for literally the two boards and whatever screws if any come with it - I've been told my car can have them fitted, which makes sense if the mounds underneath the cars is different from Jan onwards

[Bathurst]

I contacted the sellers Audi Stoke, they are offering the running boards for £830 collected or £1150 fitted (all inc vat), but location is a bit too far from me. Local dealer is offering boards supplied and fitted for £1272. These are some reasonable alternatives on ebay Side Step fit for AUDI Q7 2016+ Running Board Nerf Bar Fashionable Refitted | eBay (http://www.ebay.co.uk/itm/152044298889?clk_rvr_id=1055377413880&rmvSB=true) and Audi Q7 2016+ High Flyer Aluminium Stainless Steel Side Steps Running Boards | eBay (http://www.ebay.co.uk/itm/291778536522?clk_rvr_id=1055379106774&rmvSB=true).

A lot of price difference, not sure of differences in quality but food for thought.

T.

[andyhud007]

anyone know what the running boards are made from? Please tell me its Aluminium?

[andyhud007]

Fail

31071

[Nemo78]

It's not aluminium- why is that a fail?

[andyhud007]

apparently you cant "anodise" anything other than aluminium.... I found somewhere that will do it for me for about £100, but needs to be aluminium.....apparently (like I'm an expert in that field.. lol)

EDIT: you can apparently technically do it, but it will look rubbish.

[Nemo78]

Ahh makes sense

[srbsq7]

Hammerite HMMSFBL250 | Hammerite Trade Prices | HMMSFBL250 (http://m.www.my-tool-shed.co.uk/p26125/Hammerite_Smooth_Finish_Black_250ml/product_info.html?utm_source=googleversafeed&vfsku=26125&gpla=pla&gclid=CNaR4rqc3M0CFZcy0wode1oAzA) ?

[andyhud007]

Might work! but I'm more inclined to get something done professionally

Rung this place up (http://stores.ebay.co.uk/4x4-styling-accessories/Q7-2016-Onwards-/_i.html?_fsub=15742851017&_sid=142064407&_trksid=p4634.c0.m322)and all their boards are aluminium and the brackets are steel (separate). They have fitted a few:

Install Instructions (https://dl.dropboxusercontent.com/u/75385974/fitting%20instructions/audi/Q7/2016%20onwards/After%20Market/Audi%20Q7%202016%20onwards%20Side%20Step%20Fitting %20Instructions.pdf)

[Bathurst]

Look ok to me, any chance we can get a group buy set up for those interested and perhaps get a further discount?

Anyone know of a good garage to get them fitted or willing to help fit them for a price (Berkshire)?

[andyhud007]

I reckon a group buy could work. Guy there on phone (Ben) to be fair was very helpful...

No idea on place to fit but dont seem that hard bar the cutting of the plastic underneath the car...

[Bathurst]

Thanks Andy, I'm sure I can find a local garage to fit them as will need a ramp to make fitting easier.

I quite like these ones, Audi Q7 2016+ Premier Aluminium Side Steps Bars Running Boards Black/ Silver | eBay (http://www.ebay.co.uk/itm/Audi-Q7-2016-Premier-Aluminium-Side-Steps-Bars-Running-Boards-Black-Silver-/291778522311?hash=item43ef5aecc7)

Not sure what others preferences are but will be good to see whose interested and what quantity is required to qualify for a group buy.

T.

[andyhud007]

Yep, agreed.. they are nice. I like them too. they look pretty good on the car fitted

Some are not completely aluminium so I'm more limited as I want some that I can get anodised in black... but I'd be in for a group buy for sure.

[elrao]

Thanks Andy, I'm sure I can find a local garage to fit them as will need a ramp to make fitting easier.

I quite like these ones, Audi Q7 2016+ Premier Aluminium Side Steps Bars Running Boards Black/ Silver | eBay (http://www.ebay.co.uk/itm/Audi-Q7-2016-Premier-Aluminium-Side-Steps-Bars-Running-Boards-Black-Silver-/291778522311?hash=item43ef5aecc7)

Not sure what others preferences are but will be good to see whose interested and what quantity is required to qualify for a group buy.

T.
Those are the ones I picked out of that list too

[elrao]

apparently you cant "anodise" anything other than aluminium.... I found somewhere that will do it for me for about £100, but needs to be aluminium.....apparently (like I'm an expert in that field.. lol)

EDIT: you can apparently technically do it, but it will look rubbish.
May have to go the powder coating route for steel,

[Nemo78]

Aargh do I want them or don't I! Some pics I look at (no matter if Audi or 3rd party) I'm not sure they look good and others I think they look ok.

Main reason is to make it easier for the little ones getting in and out of the car...

[t1sh]

I have all wheel so no running boards. My sons are getting used to it. Climbing with no issues and sliding to get out with same easiness.

[satyp]

I have all wheel so no running boards. My sons are getting used to it. Climbing with no issues and sliding to get out with same easiness.
I'm trying to adjust to the same line thought re kids as they growing, so it's good, however on the other side we do take our mum's etc and they actually shrinking.. thankfully air suspension helps out for some...

I've accepted that for topside.. bikes etc I will resort to SRB was using ...keep a foldable stool in the car.. for now that's the resolution at least

Sent from my LG-H961N using Tapatalk

[satyp]

I think the market for these will explode in the next 6-8 months.. considering Audi opened the books on it.. if folk can hold on then some solutions tend to just present themselves.. :-0

Sent from my LG-H961N using Tapatalk

[Nemo78]

Right going to bite the bullet and go for them...no idea if a good plan or not but spoken to dealers and hopefully within next week or so it'll be done

[andyhud007]

Do it Nemo.. my dealer has a set on hold for me also... just a matter of finding the time (and if I can get the painted). Good luck, keep us posted.

[srbsq7]

Be interesting to see some decent photos once you've had them done.

I'm really hoping I still don't think they're for me. I don't want to spend another £1,300 [emoji15]

[andyhud007]

31074


From release notes.

This place can Power Coat them (as they are stainless steel) in Black: http://www.banburypowdercoating.co.uk/

Just need to know if the rubber parts can be removed first as they need to be baked!

[andyhud007]

More pics. I'm hoping the top bit (the stainless steel bit I assume) can be unbolted from the black bottom bit via the bolts in the second pic... anyone got any thoughts?

3107531076

[elrao]

Keep us posted on fitting, £320 quid for fitting (at Stoke) is roughly 2/3 hours these days?

[Thakey17]

Is the black bottom plastic or metal? It looks as though the rubber grip strips are easily removed which is great so that can be powder coated. If the bottom bit is metal it shouldn't be a problem and I would assume doesn't need to be removed for the process. The issue is if it's plastic the part can't be baked after coating as it would melt.

I'll be interested to see the results as I want to do the same as I'll have no chrome on my car.


Sent from my iPhone using Tapatalk

[andyhud007]

I'll keep you posted Thakey. There is a chance I'm going to my dealer on Sunday and I've asked him to leave a set to one side (as parts dept will be shut) so I can have a proper ganders at them and figure out what to do.

Agreed about plastic... If it can't be done then I may revert to a set from flea Bay and hope for the best...

[andyhud007]

Keep us posted on fitting, £320 quid for fitting (at Stoke) is roughly 2/3 hours these days?
Sounds about right to me.

[Skippy73]

Sounds about right to me.
Andy I sent you a PM about a coding for rear tail lights did you get it? I didn't want to write on your coding thread.

Skip

Sent from my SM-G935F using Tapatalk

[andyhud007]

Replied Skip!

[andyhud007]

Thought I'd share some more pics of a set I saw today. Damn they are heavy!

http://uploads.tapatalk-cdn.com/20160710/5d8a899cbcf0f991c3f1e6e71d5c42b8.jpghttp://uploads.tapatalk-cdn.com/20160710/3c30db0c1a8929f468f68f5a46a67f3c.jpghttp://uploads.tapatalk-cdn.com/20160710/dd1f3c43561179932fab07ca7bca785e.jpghttp://uploads.tapatalk-cdn.com/20160710/5936cd17e45a8d31408ef7a4d781ef03.jpg

Andy

[Skippy73]

Thought I'd share some more pics of a set I saw today. Damn they are heavy!

http://uploads.tapatalk-cdn.com/20160710/5d8a899cbcf0f991c3f1e6e71d5c42b8.jpghttp://uploads.tapatalk-cdn.com/20160710/3c30db0c1a8929f468f68f5a46a67f3c.jpghttp://uploads.tapatalk-cdn.com/20160710/dd1f3c43561179932fab07ca7bca785e.jpghttp://uploads.tapatalk-cdn.com/20160710/5936cd17e45a8d31408ef7a4d781ef03.jpg

Andy
Andy what do you think about fitting them yourself? I fitted my own on my range rover sport few years ago. We're the directions any good?

Sent from my SM-G935F using Tapatalk

[andyhud007]

Not sure mate. It's not a one man job that's for sure. Maybe on my17s you could do it but my16s need plastic etc cutting so personally I'm loathed to do it.

The internal service system at my dealer says it's 4 hours to fit them, 2 hours per side with two people.

I couldn't get over how heavy they are though...

Personally, if I get them and get them black powder coated I'll get the dealer to fit them.

[Nemo78]

Not sure mate. It's not a one man job that's for sure. Maybe on my17s you could do it but my16s need plastic etc cutting so personally I'm loathed to do it.

The internal service system at my dealer says it's 4 hours to fit them, 2 hours per side with two people.

I couldn't get over how heavy they are though...

Personally, if I get them and get them black powder coated I'll get the dealer to fit them.

Quoted exactly the same re labour...also from what I understand any MY16 cars pre Jan 16 need plastic cutting - anything post Jan 16 is ok

[elrao]

Got an initial quote of £920 parts or £1,440 fitted (so +£520 for fitting). Sent them the link to the eBay ads (I see a couple of Audi dealers have started selling on eBay) and they will match £850 parts. Hoping to get a discount on fitted (you would expect they would at least do £1,370, which is the discounted parts + non discounted fitting).

£520 for fitting seems like an awful lot to me, is an MY17 car (which arrives "by Monday")

[elrao]

My dealer has a pair reserved for me, service guy he needs to speak to it out until Monday to try to get a deal on fitting when they are doing the inspection (car arrives this weekend). Would be good to know what is actually involved, as 2 hours per side sounds like more than just putting it on a ramp and doing up a few bolts either side to hold them on!!

Looks like there are some mounts not shown in the photos above, that you bolt to the car chassis and bolt to the running board; then 8 screws that hold the lower (plastic?) trim to the main board (covering the mounts)

[Nemo78]

My dealer has a pair reserved for me, service guy he needs to speak to it out until Monday to try to get a deal on fitting when they are doing the inspection (car arrives this weekend). Would be good to know what is actually involved, as 2 hours per side sounds like more than just putting it on a ramp and doing up a few bolts either side to hold them on!!

Looks like there are some mounts not shown in the photos above, that you bolt to the car chassis and bolt to the running board; then 8 screws that hold the lower (plastic?) trim to the main board (covering the mounts)

You'd have thought on the MY17 it's easy (easier...)

I need to get back in touch with my dealers to get them fitted at some point..


Sent from my iPad using Tapatalk

[andyhud007]

My dealer has a pair reserved for me, service guy he needs to speak to it out until Monday to try to get a deal on fitting when they are doing the inspection (car arrives this weekend). Would be good to know what is actually involved, as 2 hours per side sounds like more than just putting it on a ramp and doing up a few bolts either side to hold them on!!

Looks like there are some mounts not shown in the photos above, that you bolt to the car chassis and bolt to the running board; then 8 screws that hold the lower (plastic?) trim to the main board (covering the mounts)

Yep, thats pretty much it. Apparently the MY16 cars need to have plastic trim cut out by hand to make them fit, whereas MY17 cars dont. Again, this is all speculation... none of us have seen any actual proof of what is needed but I've been told it is possible on any Q7 4M.

[elrao]

From what I can see, it looks like three mounts per board. Total of 10 bolts (3/3/4) to fit the mounts to the boards, lets say 12 more (4 per mount) to fix them to the chassis and then 8 "bolts" to hold on the plastic trim.

So about 30 bolts all in all per side, that's 4 minutes per bolt if it takes 2 hours to fit each one!

[elrao]

Running boards being fitted tomorrow, picking up the new car on Wednesday (well that's the plan...)

[andyhud007]

Running boards being fitted tomorrow, picking up the new car on Wednesday (well that's the plan...)
Enjoy!!!

If you could post some pics of the fitting brackets of the boards to your car that would be much appreciated!

Andy

[elrao]

I won't see it before it is done, or the parts. Will add some photos of boards on and the mounts etc. fitted when I have got it.

[Skippy73]

I'm fitting these myself next month


Sent from my iPhone using Tapatalk

[andyhud007]

Good man Skippy!

[elrao]

I was tempted to go the DIY route, but with a new baby due in 2 weeks I just want the car on the drive with the least hassle! Got a small discount on the fitting, am paying more than Stafford Audi were charging (£1150) but about the same as another member was quoted by their local dealer.

[elrao]

Waiting for my car to be brought up, apparently it took 8 hours to fit the running boards, on an MY 17 car.

Sales exec said it involves cutting undertrays etc, even on MY 17.

[Nemo78]

Waiting for my car to be brought up, apparently it took 8 hours to fit the running boards, on an MY 17 car.

Sales exec said it involves cutting undertrays etc, even on MY 17.

Interesting but does go alongside my info of they need a day to fit them...

Could've had mine done today but have rearranged for couple weeks time

[Skippy73]

Waiting for my car to be brought up, apparently it took 8 hours to fit the running boards, on an MY 17 car.

Sales exec said it involves cutting undertrays etc, even on MY 17.

Could you show me some photos of underneath the car please?


Sent from my iPhone using Tapatalk

[easyeieio]

Can't wait to see these fitted!

[satyp]

Had forgot to post the response on why couldn't put “Running Boards” on AWS..

http://uploads.tapatalk-cdn.com/20160719/e77a07739d1edcca4b28dc20efb35681.jpg

This was in early June..


Sent from my LG-H961N using Tapatalk

[elrao]

Some pictures of the underneath, as you can see there are covers over the actual brackets

311613116331164

[elrao]

Photos from the outside
31166311673116831169

[elrao]

3117331172

[srbsq7]

As someone who is not a great fan, I have to say they look very good!

[maxw]

Same here I wasn't a huge fan but there not in ya face and stick out a mile

very nice if I didn't have AWS I might be converted

m

[celestialbeing]

http://uploads.tapatalk-cdn.com/20160719/e77a07739d1edcca4b28dc20efb35681.jpg

Anyone who'd gone DIY found this to be true?

[andyhud007]

Anyone who'd gone DIY found this to be true?

Dont think anyone has yet.. at least, not on this forum. Few folk here with AWS.

[elrao]

I'll take an allen key to one of the covers at the weekend and get a photo of the mount underneath. Unless the baby comes.

[andyhud007]

So update on my side.

As some of you know I want to get running boards fitted to my Q7 which is MY16. Officially this "isnt allowed" and in the parts system you can't buy a set of Audi running boards for MY16 cars.

In addition, I want to get mine powder coated in black to match the car. My dealer told me "we can fit them dont worry" but as the ever cynical person that I am I said to my dealer "thats fine, but if I buy them, get them powder coated in black and then you try and fit them and find you can't, we are stuck with a set of black running boards".

So, I asked them to push to see if they REALLY could be fitted to an MY16 Q7. In the end the dealer spoke to Audi Germany and the stance from them was "You can NOT fit them to this car. Period". The problem was, and I've just asked, is they dont know WHY Audi Germany said this and what the reasoning is behind it

Now the dealer has had this statement from Audi DE they are now potentially reluctant to fit them to my car. Teach me for wanting to triple check.

I said to them, get an MY16 Q7 you have on your forecourt (most likely), stick it on some ramps and get a set and see if they will fit.. They have 3 sets in stock (I've seen the boxes) so instead of me driving over to see if they technically will fit on my car, I'm asking them to try another MY16 Q7 to see what the potential issue is/might be.

Long and short of it, I'm stuck between a rock and hard place about what to do. They may technically fit after all, but the dealer may choose not too because of the statement from Audi DE.

Or I buy them and attempt myself/3rd party... or look for a "Cheaper" set on an auction site and keep fingers crossed...

or I do nothing at all...

Any thoughts appreciated.

Frustrated Andy.

[Nemo78]

Andy I don't understand...

Is this Audi DE trying to prevent fitting on to MY16 cars or is there a difference between early MY16, mid to late MY16 and MY17 cars?

As you know my dealers have a set ready and waiting to be fitted and earlier on the thread someone posted pics of their car with boards. Mine is a MY16 car and dealers did check to make sure they could be fitted.

The poster with the pictures (York Audi from memory) also fitted them...and that'll be a My16 car also

This then leads me to believe there is a difference between our MY16s?

Again recalling back did the eBay link via Stoke state Jan 16 onwards?

If you are happy to wait a couple of weeks I can check with my guys as and when I go in

[Papereyes]

So update on my side.

As some of you know I want to get running boards fitted to my Q7 which is MY16. Officially this "isnt allowed" and in the parts system you can't buy a set of Audi running boards for MY16 cars.

In addition, I want to get mine powder coated in black to match the car. My dealer told me "we can fit them dont worry" but as the ever cynical person that I am I said to my dealer "thats fine, but if I buy them, get them powder coated in black and then you try and fit them and find you can't, we are stuck with a set of black running boards".

So, I asked them to push to see if they REALLY could be fitted to an MY16 Q7. In the end the dealer spoke to Audi Germany and the stance from them was "You can NOT fit them to this car. Period". The problem was, and I've just asked, is they dont know WHY Audi Germany said this and what the reasoning is behind it

Now the dealer has had this statement from Audi DE they are now potentially reluctant to fit them to my car. Teach me for wanting to triple check.

I said to them, get an MY16 Q7 you have on your forecourt (most likely), stick it on some ramps and get a set and see if they will fit.. They have 3 sets in stock (I've seen the boxes) so instead of me driving over to see if they technically will fit on my car, I'm asking them to try another MY16 Q7 to see what the potential issue is/might be.

Long and short of it, I'm stuck between a rock and hard place about what to do. They may technically fit after all, but the dealer may choose not too because of the statement from Audi DE.

Or I buy them and attempt myself/3rd party... or look for a "Cheaper" set on an auction site and keep fingers crossed...

or I do nothing at all...

Any thoughts appreciated.

Frustrated Andy.

Maybe try another dealer Andy, and ask them not to check with Audi de. Certainly feel for you though.


Sent from my iPhone using Tapatalk

[Skippy73]

So update on my side.

As some of you know I want to get running boards fitted to my Q7 which is MY16. Officially this "isnt allowed" and in the parts system you can't buy a set of Audi running boards for MY16 cars.

In addition, I want to get mine powder coated in black to match the car. My dealer told me "we can fit them dont worry" but as the ever cynical person that I am I said to my dealer "thats fine, but if I buy them, get them powder coated in black and then you try and fit them and find you can't, we are stuck with a set of black running boards".

So, I asked them to push to see if they REALLY could be fitted to an MY16 Q7. In the end the dealer spoke to Audi Germany and the stance from them was "You can NOT fit them to this car. Period". The problem was, and I've just asked, is they dont know WHY Audi Germany said this and what the reasoning is behind it

Now the dealer has had this statement from Audi DE they are now potentially reluctant to fit them to my car. Teach me for wanting to triple check.

I said to them, get an MY16 Q7 you have on your forecourt (most likely), stick it on some ramps and get a set and see if they will fit.. They have 3 sets in stock (I've seen the boxes) so instead of me driving over to see if they technically will fit on my car, I'm asking them to try another MY16 Q7 to see what the potential issue is/might be.

Long and short of it, I'm stuck between a rock and hard place about what to do. They may technically fit after all, but the dealer may choose not too because of the statement from Audi DE.

Or I buy them and attempt myself/3rd party... or look for a "Cheaper" set on an auction site and keep fingers crossed...

or I do nothing at all...

Any thoughts appreciated.

Frustrated Andy.

Andy I have plan. First get under your car and remove the covers. Just look to see the the threaded bolt holes exist and are ready. Then just put your covers back on no harm done.

I'm looking at buying these myself so if you want we can meet up as we live fairly close and you could help me fit mine. They are heavy so will need the help anyway. If I only have to cut the covers I'm not bothered.

In worst case if they don't fit my car I can sell them to a MY17 person on here or eBay easily so the risk is minimal.

My Car is a May 2016 car.


Just a thought.


Sent from my iPhone using Tapatalk

[Nemo78]

Andy I have plan. First get under your car and remove the covers. Just look to see the the threaded bolt holes exist and are ready. Then just put your covers back on no harm done.

I'm looking at buying these myself so if you want we can meet up as we live fairly close and you could help me fit mine. They are heavy so will need the help anyway. If I only have to cut the covers I'm not bothered.

In worst case if they don't fit my car I can sell them to a MY17 person on here or eBay easily so the risk is minimal.

My Car is a May 2016 car.


Just a thought.


Sent from my iPhone using Tapatalk

Like your thinking there Skippy [emoji5]

Yours will take them I bet as my
March 16 car will

It's the pre Jan 16 cars that are we don't know about / why....

[Skippy73]

Like your thinking there Skippy [emoji5]

Yours will take them I bet as my
March 16 car will

It's the pre Jan 16 cars that are we don't know about / why....

Yeah but Andy and I are already looking to meet and with his Q7 side by side we can compare any difference underneath I reckon


Sent from my iPhone using Tapatalk

[Nemo78]

Right potentially solved...until anyone hears any different.

The floor panel on Jan 16 build onwards was reinforced allowing the Running Boards to be fitted. Any 4M Q7 built in 2015 doesn't have this and therefore can't take the running boards....

[Skippy73]

Right potentially solved...until anyone hears any different.

The floor panel on Jan 16 build onwards was reinforced allowing the Running Boards to be fitted. Any 4M Q7 built in 2015 doesn't have this and therefore can't take the running boards....

Ohhh I didn't realise there were reinforced changes made. That might change things


Sent from my iPhone using Tapatalk

[andyhud007]

Cheers all, just read through all your responses. Appreciated.

Damn, if it is a reinforced issue then I'm potentially stuffed... that would be gutting

Nemo - How did you come about that info mate?

[andyhud007]

How can I work out my build date? Is there somewhere I can go online to see that? I'm 99% sure its late 2015 but my paperwork doesnt show it. (I bought car off forecourt, not factory order)

Looks like I may have to resort to auction site running boards....

[Skippy73]

How can I work out my build date? Is there somewhere I can go online to see that? I'm 99% sure its late 2015 but my paperwork doesnt show it. (I bought car off forecourt, not factory order)

Looks like I may have to resort to auction site running boards....

Mate lets compare cars side by side first


Sent from my iPhone using Tapatalk

[elrao]

There is usually a way to tell these things from the VIN, all numbers after xxx etc. Your dealer should be able to tell you from your VIN.

Have also heard of manufacture dates being on the door jam sticker (not sure where it is on the Q7)

[andyhud007]

Cheers all. I think I'm going to meet Skippy and will have a ganders then and go from there...

I'm 99.9% sure my car is pre Jan 2016.

[Nemo78]

Cheers all, just read through all your responses. Appreciated.

Damn, if it is a reinforced issue then I'm potentially stuffed... that would be gutting

Nemo - How did you come about that info mate?

Had a lightbulb moment.....used my Sept 15 build car and rang Stoke as they stated on their advert re Jan 16 cars onwards.

The guy was pretty knowledgable and no hesitation in his reply.


Sent from my iPad using Tapatalk

[andyhud007]

Sad Face moment :(

[srbsq7]

I might be wrong but I think he VIN for 2015 cars begins WAUZZZ4M1 with the a 2 on the end for Jan 16 cars. Not sure if MY17 have a 3.

Could be wrong!

[andyhud007]

So I went on an auction site to find 3rd party running boards as I knew some had pictures on an actual car. I found one with a number plate so I could look it up online

31176

Vehicle Reg Details below (which implies its way before Jan 2016)

31177

Which implies 3rd party non-genuine boards do fit the earlier pre-Jan 2016 cars..

[Papereyes]

What site are you usin Andy? Btw are those wheels 20 or 19's?


Sent from my iPhone using Tapatalk

[andyhud007]

Just stuck in Google. Check car details by reg. Chucked it in first result.

No Idea on wheels I'm afriad. Just a pic I pulled off ebay

[Nemo78]

What site are you usin Andy? Btw are those wheels 20 or 19's?


Sent from my iPhone using Tapatalk

They look like the standard 20s on S-Line

[elrao]

Car has an S-Line badge, so probably 20s?

[srbsq7]

Car has an S-Line badge, so probably 20s?

Definitely. There what I have. When I ordered I wanted to max the comfort so went for air plus standard.

If I were doing it again, I'd go 21's with air. Just looks so much better.

[andyhud007]

Oi you lot, stop getting distracted by wheels :)

This looks doable... instructions (here (https://dl.dropboxusercontent.com/u/75385974/fitting%20instructions/audi/Q7/2016%20onwards/After%20Market/Audi%20Q7%202016%20onwards%20Side%20Step%20Fitting %20Instructions.pdf)), although not great, arent exactly hard to follow. I'm going to see if these holes exist on my car later when the other half gets home.

Still want to meet with Skippy though and check the cars side-by-side

[Skippy73]

Oi you lot, stop getting distracted by wheels :)

This looks doable... instructions (here (https://dl.dropboxusercontent.com/u/75385974/fitting%20instructions/audi/Q7/2016%20onwards/After%20Market/Audi%20Q7%202016%20onwards%20Side%20Step%20Fitting %20Instructions.pdf)), although not great, arent exactly hard to follow. I'm going to see if these holes exist on my car later when the other half gets home.

Still want to meet with Skippy though and check the cars side-by-side

Yeah I'll need you to help me fit mine Andy ;-)


Sent from my iPhone using Tapatalk

[elrao]

I might be wrong but I think he VIN for 2015 cars begins WAUZZZ4M1 with the a 2 on the end for Jan 16 cars. Not sure if MY17 have a 3.

Could be wrong!
My MY17 car has VIN "WAUZZZ4M3xxxxxxxx"

[andyhud007]

Mine is WAUZZZ4MGxxxxxxx

[satyp]

I read somewhere “H” ”somewhere in the VIN = MY17 so M = must mean MY16.

Sent from my LG-H961N using Tapatalk

[andyhud007]

OK. So here are some pics of the underside of my cat. MY16. So technically genuine audi running boards can't be fitted.

You can see this big plastic shroud and if you can tell it's identical on both sides of the car. Seems like it's just held in with caps and a few torx screws but I'll check the workshop manual system to confirm.

Sadly until I remove it I can't see any mounting holes underneath.

http://uploads.tapatalk-cdn.com/20160720/d6116a9d00aca7e13445cc2f31e68538.jpghttp://uploads.tapatalk-cdn.com/20160720/594302a38424d6899b7300cd54ab22e5.jpghttp://uploads.tapatalk-cdn.com/20160720/d17505d4dd13027800be0a367cd433cb.jpghttp://uploads.tapatalk-cdn.com/20160720/a11829cc58d27fd689687a2bf4e567c7.jpghttp://uploads.tapatalk-cdn.com/20160720/cd64f1acd6732ca4a206833be1654612.jpghttp://uploads.tapatalk-cdn.com/20160720/4e15fa8f16d79b5a256bbcb9fd5462ed.jpghttp://uploads.tapatalk-cdn.com/20160720/cd6bcd6300d9a119a7aa30beefe6b7e2.jpghttp://uploads.tapatalk-cdn.com/20160720/83cc12057a87d99601908333c54aec6b.jpg

[Skippy73]

OK. So here are some pics of the underside of my cat. MY16. So technically genuine audi running boards can't be fitted.

You can see this big plastic shroud and if you can tell it's identical on both sides of the car. Seems like it's just held in with caps and a few torx screws but I'll check the workshop manual system to confirm.

Sadly until I remove it I can't see any mounting holes underneath.

http://uploads.tapatalk-cdn.com/20160720/d6116a9d00aca7e13445cc2f31e68538.jpghttp://uploads.tapatalk-cdn.com/20160720/594302a38424d6899b7300cd54ab22e5.jpghttp://uploads.tapatalk-cdn.com/20160720/d17505d4dd13027800be0a367cd433cb.jpghttp://uploads.tapatalk-cdn.com/20160720/a11829cc58d27fd689687a2bf4e567c7.jpghttp://uploads.tapatalk-cdn.com/20160720/cd64f1acd6732ca4a206833be1654612.jpghttp://uploads.tapatalk-cdn.com/20160720/4e15fa8f16d79b5a256bbcb9fd5462ed.jpghttp://uploads.tapatalk-cdn.com/20160720/cd6bcd6300d9a119a7aa30beefe6b7e2.jpghttp://uploads.tapatalk-cdn.com/20160720/83cc12057a87d99601908333c54aec6b.jpg

Just checked mine and it looks the same Andy. I'll have to raise mine one side on ramps to take the cover off and look behind.


Sent from my iPhone using Tapatalk

[Nemo78]

OK. So here are some pics of the underside of my cat. MY16. So technically genuine audi running boards can't be fitted.

You can see this big plastic shroud and if you can tell it's identical on both sides of the car. Seems like it's just held in with caps and a few torx screws but I'll check the workshop manual system to confirm.

Sadly until I remove it I can't see any mounting holes underneath.

http://uploads.tapatalk-cdn.com/20160720/d6116a9d00aca7e13445cc2f31e68538.jpghttp://uploads.tapatalk-cdn.com/20160720/594302a38424d6899b7300cd54ab22e5.jpghttp://uploads.tapatalk-cdn.com/20160720/d17505d4dd13027800be0a367cd433cb.jpghttp://uploads.tapatalk-cdn.com/20160720/a11829cc58d27fd689687a2bf4e567c7.jpghttp://uploads.tapatalk-cdn.com/20160720/cd64f1acd6732ca4a206833be1654612.jpghttp://uploads.tapatalk-cdn.com/20160720/4e15fa8f16d79b5a256bbcb9fd5462ed.jpghttp://uploads.tapatalk-cdn.com/20160720/cd6bcd6300d9a119a7aa30beefe6b7e2.jpghttp://uploads.tapatalk-cdn.com/20160720/83cc12057a87d99601908333c54aec6b.jpg

Mine looks identical....

VIN 4M8G