4 or 8 channel Parking module question

[warp_speed]

Hello, I've got myself an S4 with rear parking sensors and managed to enable the graphical display on the infotainment system (non MMI).

I wanted to see if I could retrofit the front parking sensors and done a fair bit of research on parts. But I need to know if my existing module is an 8 channel one or not. Its part number is 8K0 919 475 O, but I can't find anything about this module, can anyone help?

[Guest 2]

are you sure its an O controller? Take a screenshot of the VCDS module page when you access #10 park assist.

[warp_speed]

Ok it has to be the crappiest looking Q I've ever seen. So its actually a Q module, but it allows graphical display so there seems to be some info on the net that's wrong. Q is 4 channel non graphical supposedly. Oh well it still requires a new module dag nab it.

[Gunnark100]

Ok it has to be the crappiest looking Q I've ever seen. So its actually a Q module, but it allows graphical display so there seems to be some info on the net that's wrong. Q is 4 channel non graphical supposedly. Oh well it still requires a new module dag nab it.


I have D which should be no grapic as well but still working, so there is some not correct info on web(for me it took a while to activate this, play with R on/off etc, finally code was accepted)

[Stonner]

Not sure if this is any use?? Found this when I was considering fitting parking sensors.

8K0 919 475 AA -8 sensors, graphical support, rear view camera support
8K0 919 475 A - 8 sensors, graphical support
8K0 919 475 B - 4 sensors, no graphical support
8K0 919 475 C - 8 sensors, graphical support, rear view camera support
8K0 919 475 D - 4 sensors, no graphical support
8K0 919 475 E - 8 sensors, graphical support, rear view camera support
8K0 919 475 H - 4 sensors, graphical support, rear view camera support
8K0 919 475 R - 8 sensors, graphical support, rear view camera support