Help with Throttle actuator and DPF fault codes

[croopra]

Hi,

Recently got a gendan cable to help with lights popping up on dash..which i will happily make available for use to forum members around Romford area.

My problem is The DPF does not regenerating whilst driving or via forced vcds method. Soot is now at 40g level so need to get sorted asap.

The fault codes are showing throttle actuator (http://shop.ebay.co.uk/?_nkw=actuator) error, could this be stopping the DFP regenerating? If so any one know how to fix...

Car is A4 B8 2.0tdi 143

Thanks in advance for help





Tuesday,14,July,2015,22:07:43:11077
VCDS Version: Release 14.10.2 (x64)
Ross-Tech: Home (http://www.ross-tech.com/)


Address 01: Engine Labels: 03L-906-022-CAG.CLB
Control Module Part Number: 03L 906 022 B HW: 03L 906 022 B
Component and/or Version: R4 2,0L EDC H01 3210
Software Coding: 0104002C18072118
Work Shop Code: WSC 99999 1023 2097151
ASAM Dataset: EV_ECM20TDI03L906022B A01014 (AU48)
ROD: EV_ECM20TDI03L906022B.rod
VCID: 2447A0012FF0BA012A7-8071
3 Faults Found:


5188 - Diesel Particle Filter
P2463 00 [175] - Excessive Soot Accumulation
MIL ON - Confirmed - Tested Since Memory Clear








9123 - Throttle Actuator (http://shop.ebay.co.uk/?_nkw=actuator) Control System
P2112 00 [032] - Stuck Closed
Intermittent - Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 171893 km
Date: 2015.07.05
Time: 12:42:29


9124 - Throttle Actuator (http://shop.ebay.co.uk/?_nkw=actuator) Control System
P2111 00 [040] - Stuck Open
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 48
Mileage: 171752 km
Date: 2015.06.19
Time: 12:57:49




Readiness: 1 2 0 0 0