PDA

View Full Version : Question My Audi A6 2006 2.7 TDI has been having problems with her turbo



michelle43
06-07-2015, 01:47 PM
My Audi A6 2006 2.7 TDI has been having problems with her turbo she can drive fine and then the glow plugs sign comes on and she won't rev any higher than 2.5 but as soon as I take my foot off the gas I hear a air whistling noise.

We have taken the turbo off and clean it but still the problem is there I have had a diagnostics reading done on her and 8 faults were found please see the list. 28269

Sam
06-07-2015, 02:09 PM
That photo shows the summary of faults but not the fault codes.

Do you have the latter sections of the report?

michelle43
06-07-2015, 03:05 PM
Thanks for your reply here are the other pages...

282702827128272

Sam
06-07-2015, 03:30 PM
Perfect.

Have those codes come back after you've replaced the turbo and cleared them?

The first sheet would suggest whoever scanned used VCDS, but those aren't VCDS codes - what scanner was used?

Page 1

Your turbo is buggered, but if you've cleaned it..... Have you checked its movement? Oil starvation?

Page 2

Glowplug on Cyl1 is goosed, this may be a red herring though.
18997/P2565/009573 - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/18997/P2565/009573)
See Page 1

Page 3

16618/P0234/000564 - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/16618/P0234/000564)
16488/P0104/000260 - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/16488/P0104/000260)

michelle43
06-07-2015, 03:41 PM
Thanks Sam gives me something to read..

I took the car to my local chap for the readings so don't know what scanner was used.

No the scan was done before we took the turbo out and cleaned it I have friend who is a mechanic he cleaned and oil the linkages he said the turbo looked good and couldn't see why it should not work, but he is so busy at the moment I thought I would ask on here.