help, cruise controll wont code up

[nunomatos]

fitted the cruise control and Dis but wont code up , comes up fault code -
steering wheel incorrect coded!
I follow this how to guide to do the job,https://dl.dropboxusercontent.com/u/8970502/VAG-CODING/cruise-dis-activation.html
not sure what I have done rong?


005785 - powertrain data bus missing from steering (http://www.eurocarparts.com/suspension-and-steering) wheel electrics - p1699_009_open circuit or short to ground. anybody shed any light on this.

the steering wheel ecu is ending (s) letter
I also installed dis but doesn't work hither! I do have the sperm well on the dash but that's it!
I found the blue plug but I don't know what colour the hire is from pin 1 to be grounded?

A4 b6 2.5tdi 2004 Quattro Avant manual



any help would be appreciated

[VAG-Abound]

I guess you saw the Ross Tech page: 18107/P1699/005785 - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/18107/P1699/005785)

Did you clear the code and check that it comes back, rather than it being stored from half-way through the install?

[audi.upgrades]

hi your steering wheel module need to be change for letter ending L or N for cruise control
about the dis are you make coding in Instrument adaptation ?

[nunomatos]

Cheers for that!
All in now,replace the module for a Q,everything works but abs,warning does not shift!
Maybe it doesn't take the Q module? Not sure,any help appreciate
Thanks again

[nunomatos]

Could any tell me what module's will work?
My car is A4 2004 2.5tdi manual avant
Thanks in advance