C39KER
02-01-2015, 09:37 AM
Happy New year everyone
Quick question;
My ABS is not communicating with my steering wheel after changing the Steering rack to a generation 3.
So far;
- I changed the wiring loom
- Control Module
I coded the module into the car no problem...went to update the J500 software as discussed in other posts (Applies to vehicles with generation 3 steering box
If a new steering box has been installed, the power steering control unit -J500- must be re-adapted using vehicle diagnostic,
testing and information system -VAS 5051B- ⇒ Vehicle diagnostic, testing and information system VAS 5051 „Guided Fault-
Finding“)
Its not allowing me to do the update because no communication to the ABS....is it possible to update the ABS to tel it I have a generation 3 rack, currently have ABS software 130
Sent from my iPad using Tapatalk
Quick question;
My ABS is not communicating with my steering wheel after changing the Steering rack to a generation 3.
So far;
- I changed the wiring loom
- Control Module
I coded the module into the car no problem...went to update the J500 software as discussed in other posts (Applies to vehicles with generation 3 steering box
If a new steering box has been installed, the power steering control unit -J500- must be re-adapted using vehicle diagnostic,
testing and information system -VAS 5051B- ⇒ Vehicle diagnostic, testing and information system VAS 5051 „Guided Fault-
Finding“)
Its not allowing me to do the update because no communication to the ABS....is it possible to update the ABS to tel it I have a generation 3 rack, currently have ABS software 130
Sent from my iPad using Tapatalk