squawwoods
23-09-2007, 05:39 PM
im rebuilding the above engine and have a cylinder head off of a later engine(90 bhp)code unknown it has injectors held by forks as opposed to the original which screw in,can i use the later head?if so are there any other components which i need to change?
adamss24
23-09-2007, 09:00 PM
Hi, the later head is from a direct injection engine, yours is a indirect injection engine...You will need the pump, engine management , wiring loom + instruments and a whole lot of sensors for the swap. I suggest you get a similar engine/head and stick with the mechanical pump you have as its way more reliable than the later ones !
Crasher
23-09-2007, 09:04 PM
Pistons as well. Just don't do it!
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.