Rear plate light

[Koosey87]

Hi Guys,

Wondering if anyone has found any LED/white rear number plate bulbs that don't throw up dashboard errors? I've just tried my third set which promised to be Canbus and error free but weren't - losing my patience a bit!

Car is a 2009 A3 1.9 TDI Sport 3 door.

[JayA3sline]

Loads of topics on this... I used a kufatec harness which adds on to your additional wiring harness to eliminate the alarm. Or use VCDS to get rid


Sent from my iPhone using Tapatalk

[Koosey87]

Thanks mate I'll look into that.

[Guest 2]

Fit OEM units - Audi OEM Led Number Plate Light fitted .. Success! (http://www.vwaudiforum.co.uk/forum/showthread.php?132774-Audi-OEM-Led-Number-Plate-Light-fitted-Success!&highlight=oem+led)

[Koosey87]

Wow, brilliant. Just gonna need to find a pair! Thanks.

[Koosey87]

Well I got those rear plate lights, same part numbers as in that link you gave but still getting an error on the dash :(

Would this solve the problem?

http://www.kufatec.co.uk/shop/en/Audi/A4-B6/8E/Adapter-plate-LEDs-Audi-A4-B6-B7-/-Audi-A3-8P

Starting to think this is costing more time, effort and money than its worth!

[JayA3sline]

Which is the issue I had hence why I bought the kufatec harness... Keep the OEM led in their but install the harness and it'll a) look OEM and b) fault free


Sent from my iPhone using Tapatalk

[Koosey87]

Thanks. Does that harness come with instructions on where it goes? I assume all you need to do is take the inner plastic boot trim off? I've been reading about that and apparently it's a nightmare!

[JayA3sline]

It's not as bad as it sounds, just make sure ALL the bolts are out... And slowly work your way around, pull outward horizontally to avoid any breaks. I've got a thread on here somewhere with pictures of when I did mine. Search for led number plates and it should pop up. Can't remember if there were instructions but it's a simple plug and play harness. No instructions required to be honest.


Sent from my iPhone using Tapatalk