View Full Version : Retrofit Lane assist
Hi all
As the title say I will have one more try in getting this up and running.
I have the ACC camera in the windscreen, witch I believe will do the reading of the lines in the road.
I will have to get the blinker stalk with the "enable line assist button in the end of it.
I do not intend to get side assist, so no need for the mirrors to be swapped.
My question is if anyone know what I'm missing to get this working?
I assume one stearin wheel module, to intersept steering wheel angles, and maybe do the direction change if drifting out of lane.
I assume one module to proses and interpret the camera input for this purpose.
And obvious coding :-)
Furillo
24-05-2014, 09:24 PM
Have to ask why bother? First day of A7 ownership switched it off and never used it again. Have friends who did exactly the same. It's like driving with a flat tyre. Other than that good luck!
M1tchy
26-05-2014, 09:22 AM
I use it on motorways and it's brilliant. As the steering turns back into the lane and vibrates, I think you will need some form of electric motor for these functions.
Which country are you in?
Sent from my iPhone using Tapatalk
I use it on motorways and it's brilliant. As the steering turns back into the lane and vibrates, I think you will need some form of electric motor for these functions.
Which country are you in?
Sent from my iPhone using Tapatalk
I'm in Norway :-)
I assume the steering is done by the elecktro mech. steering.
Was hoping to be able to skip the vibrating motor in the steering wheel, is it important for the experience?
I know now that the camera will pick up the lanes, so that is in place, i need someone with vcds to do a scan of all the modules,
so I can compare with mine, to see what modules is missing. :-)
I'm in Norway :-)
I assume the steering is done by the elecktro mech. steering.
Was hoping to be able to skip the vibrating motor in the steering wheel, is it important for the experience?
I know now that the camera will pick up the lanes, so that is in place, i need someone with vcds to do a scan of all the modules,
so I can compare with mine, to see what modules is missing. :-)
I believe the path is as follows:
ACC camera -> Image processing module (not present) ->Steering control module (not present) -> Electric steering module
M1tchy
26-05-2014, 02:07 PM
If you PM me your email address I will send you a VCDS scan of my car which has lane assist fitted
Sent from my iPhone using Tapatalk
New info,
the only item that seems to be different is this:
Address 3C: Lane Change Labels: None
Part No SW: 4G0 907 566 J HW: 4G0 907 566
Component: J769 SWA MasterH04 0060
Revision: 00H04000 Serial number: 6PZ 010 287-08
Coding: 0001107
Shop #: WSC 02391 785 00200
VCID: 36685D574130B9AE71B-8063
Subsystem 1 - Part No: 4G0 907 568 J
Component: J770 SWA Slave H04 0060
Subsystem 2 - Serial number: 6PZ 010 287-28
Subsystem 3 - Serial number: 5F04.09.1300H04000AMS16842ÿ
Subsystem 4 - Serial number: S16842ÿ
In terms of HW this seems to be the detectors in the back, for SIDE ASSIST, and dont have to do with lane assist.
It seems to be harder to find out about the subsystems....
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.