View Full Version : Q7 parking sensors
Chrisy
24-02-2014, 07:59 PM
My front and rear parking sensors on my Q7 2006 model are not working?
When I engage reverse I get a tone for about 3 seconds but they do not beep whatsoever when I get close to ANYTHING....
I have tried engaging reverse when ignition is on and listening to each sensor but nothing? Not a thing
PLEASE HELP
Guest 2
24-02-2014, 08:00 PM
Moved to Q7.
You need a fault scan, maybe a dead module etc but a scan with VCDS will help alot.
Gavin0478
24-02-2014, 09:42 PM
If you do not have VCDS a quick check can be done by disconnecting one sensor at a time as its more likely a sensor has failed.
If you were getting a constant beep (like a false warning) and not the three beeps error tone you can often sort this by gently using a wooden toothpick or similar to clean the sensor as muck often sticks in here giving a false reading.
Cockney Boy
24-02-2014, 09:59 PM
First off all, check the fuse. If that's ok then you need a scan. For all sensors to fail it won't be one dragging them all down as they run independently from each other.
Sent from my iPad using Tapatalk HD
Chrisy
24-02-2014, 10:45 PM
Thank you
without sounding silly can you tell me where the fuses are and how I'd know which one it is?
i do get a 3 second tone when reverse is activated
Guest 2
24-02-2014, 10:46 PM
On both ends of the dash in below the pop off panels. On the panel you pop off there will be a diagram.
Chrisy
24-02-2014, 10:47 PM
Thank you
Gavin0478
24-02-2014, 11:12 PM
May be in the rear fuse box also.
Its behind the cover on the right hand side in the boot, if you look carefully there is a small gap for where to insert a screwdriver to pop the cover off.
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.