PDA

View Full Version : Vag-Com for my car model



Padwick
11-09-2007, 10:45 PM
Apoligies if there's a section on this but I couldn't find one.

I'm looking to download Vag-Com but the download page is like hyrogliphics to me with all this hex, etc.

I have ruled out getting the version 7 as I can't see a cable for it cheap on EBay and I'm not sure it'll even work with my car anyway.

Could anyone tell me which version I need to download and which cable I need to work with my car?

It's a 2001 Audi A6 1.9TD1 115bhp.

Thanks in advance,
P.

cbrpaul
12-09-2007, 10:00 AM
if your seriously going to use Vagcom to its full effect the only real way to go is to purchase the " real Deal" from ross tec, at a price !!!!




:beerchug:

AutoTDI
12-09-2007, 10:19 AM
I use v409.1 (registered for $99) with a "dumb" interface cable off eBay. Works fine with my 97MY A4 1.9TDI 110. If you buy the cable first and then download the free "shareware" version of the software, you can try it out, with limited functions, before paying for registration.

cbrpaul
12-09-2007, 11:41 AM
good idea , but i dont think its set in stone that all vagcom features will work even when you register it on a 3rd party cable , Ross tec also state this i think


:beerchug:

Crasher
12-09-2007, 01:28 PM
No substitute for a Hex USB cable, I buy them from Ilexa.

cbrpaul
12-09-2007, 02:16 PM
No substitute for a Hex USB cable, I buy them from Ilexa.


how much m8 ?

Crasher
12-09-2007, 02:34 PM
http://www.ilexa.co.uk/acatalog/vagcom.html

AutoTDI
12-09-2007, 07:45 PM
good idea , but i dont think its set in stone that all vagcom features will work even when you register it on a 3rd party cable , Ross tec also state this i think
:beerchug:
True, but you still get most of the features. You can check first by downloading the user manual.