Power fold wing mirror retrofit help

[hsmithboy30]

Hi
i am looking to retrofit the 2010> power fold wing mirrors to my 2008 A4 s line. I have read the excellent post on audi enthusiasts site but would like some advice. Is it the mirror housings or the door control units that actually allow the power fold? I.e would any 2010> wing mirrors with the 2 wires work with the relevant control modules and coding?
Thanks in advance

[Cockney Boy]

You'll need new door controller for sure but my guess is a few extra bit too

[Guest 2]

Hi
i am looking to retrofit the 2010> power fold wing mirrors to my 2008 A4 s line. I have read the excellent post on audi enthusiasts site but would like some advice. Is it the mirror housings or the door control units that actually allow the power fold? I.e would any 2010> wing mirrors with the 2 wires work with the relevant control modules and coding?
Thanks in advance

VCDS dump of your passenger and driver door modules before you buy anything.

[hsmithboy30]

Will do Chris, I don't have auto dim or memory mirrors as standard so in sure il need door controllers. Will scan my car if it ever stops raining

[Issac Hunt]

I've got folding and dimming mirrors on mine, let me know if you need any VCDS info etc....

[hsmithboy30]

Please could you let me know the part numbers off your mirrors and door control modules so I can cross reference them from mine?

[Issac Hunt]

Yeah no problem. I'll scan it tomorrow...

[Issac Hunt]

8T0 959 793P drivers side and 792P passenger side are the door ecu numbers

[hsmithboy30]

Many thanks mate, what year is your car? Also is there any way of getting the part numbers from your mirror bases from VCDS?

[Issac Hunt]

2013. Mirror bases aren't listed by VCDS I'm afraid.

[hsmithboy30]

Ok mate thanks for your help, I think I have managed to secure a pair of door control modules with your part numbers :)

[Charlie101]

Hello,

i have a 2013 Audi RS4 Avant and am trying to retro fit power folding door mirrors and nonAudi Dealer can assist?
Do you happen to know if this can be done, and if so, what parts are required? Would this be something that needs to be coded also or is it a plug and play figment?

hope you can help!!

Charlie

[hsmithboy30]

Can't believe the rs4 can be specked without power fold mirrors?!! It can be retrofitted google audienthusiast and the site has a step by step guide with everything you need including part numbers