Full legal copy of vcds Oxford,

[Metallurgix]

Not a lot of experience but always willing to take a look and see if I can help.

[mji]

Any chance of some help tomorrow (Friday) either lunchtime if you're not too far from Cowley, or early evening?
Thank,
Mark

[Metallurgix]

Hi Mark, Can't do Friday as I'm away from Oxford at the weekends. Could do Monday or Tuesday night. What's the problem? is the vehicle driveable?

[mji]

Thanks for the response. I'm only in Oxford 2 days a week and next week I have to rush off after work both days.

The problem is with the central locking - the boot and fuel filler flap locks don't work. The vehicle is driveable.

[dermotdm]

Any chance of some help coding for a retrofitted Cruse Control to my 2007 S4 Avant. The unit is fitted but I don't have VAG-COM or or VCDS.
I live in central Oxford.

[Metallurgix]

Any chance of some help coding for a retrofitted Cruse Control to my 2007 S4 Avant. The unit is fitted but I don't have VAG-COM or or VCDS.
I live in central Oxford.

I can do one evening next week. I'm in Cuttslowe, whereabouts are you? I've no experience of coding a cruise control though.

[dermotdm]

Cheers,

Next Mon or Tues would be perfect. I am in Central Oxford (Longwall)

[Guest 2]

Cheers,

Next Mon or Tues would be perfect. I am in Central Oxford (Longwall)

Did you add the additional wire which may be needed and check your steering ecu version is compatible?

Cruise Control Retrofitting (8E) - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/Cruise_Control_Retrofitting_(8E))

[dermotdm]

Cheers Chris, I think hardware side is OK. The car has 3 spoke multifunction wheel but from what I have read we need to tell VCDS we have fitted cruise.
Can we check ECU with VCDS.

Would you like to email me offline regarding meeting up etc

Dermot
<dermot.ohare@chem.ox.ac.uk>

[chet_cc]

hi there...

Any chance of some vcds coding help?

i have an RNS510 navigation headunit and just had an aftermarket sub and amplifier installed to it. I need to code it to output a flat EQ as suggested is possible here:
Volkswagen RNS 510 coding when installing with a factory amplifier | my-gti.com (http://www.my-gti.com/1411/volkswagen-rns-510-coding-when-installing-with-a-factory-amplifier) the byte 5 bit in particular is pretty much all i'm looking to do.

The car is a 2010 Passat CC

I'll be in oxford on Monday (17/10/2014) if that isn't too short notice? or could arrange for some other date/time

cheers :)

[colinstone]

Metallurgix,
Wondered if you were still in Oxford with a VCDS? No immediate hurry, getting a Golf MkVII in Oct and might need a tweak!