Advice on upgrading B8 A4 SE 17'' wheels to 19''? Do I need to change suspension springs?

[Mitchm71]

Hi all,

Fairly new to Audi and this site so please excuse me if I am not going through the correct channels. I am looking for advice on changing the wheels on my 58 plate A4 SE from 17'' wheels to 19''. I have heard rumours that I will need to change out the suspension springs as well to make it look OK. Has anyone ever had any experience of this and can they advise if the gap in the wheel arch would look silly if I kept the original springs on?

Any pictures of a similar set up would be ideal, I just do not want to shell out on a set of new wheels only to find out it looks daft.

Thanks in advance.

[Guest 2]

With the bigger wheels the arch gap will increase, lowering the car afterwards is personal choice and not really necessary.

Remember to inform your insurance of any mods just to keep yourself safe.

Welcome to VWAF ;)

[Mitchm71]

Hi Chris,

Thanks for the prompt reply. I am aware that it is not necessary to maintain the mechanical integrity of the car, it was more so a question of how they would look once they were on. If it is common knowledge that they would look ridiculous without adjusting the suspension then I would just leave it. I should have just gone for the s line but I got a good deal on an approved vehicle from Stoke and I was maybe a bit too keen to own my first Audi. Also, will this affect my speedometer reading?

[Guest 2]

I'll have a look on the forum and see if I find something (theres bound to be someone whos put big wheels on a SE).

Speedo, no, if you keep within the rolling radius of your current tyres. 19s on a B8 should be 255/35/19.

[Mitchm71]

Ok thanks a lot for your help and advice. I will also have a search for some info on the forums once I find my way about the site!

[JimC64]

Done something similar on my A6, moving from 225 50 17's to 255 35 19's

One thing to remember, ( a lot forget ) and it can be an expensive mistake, is to look out for the ET or offset

The other thing could be depending on what you buy is the centre bore, mine is 57.1mm but the wheels I bought were 66.6 mm, easily cured by spigot rings, but just as a friendly piece of advice.

Mine is also an SE.......The gap is slightly bigger than I'd like, but not hugely so. Personally as the profile of the rubber has decreased I'm wary about taking more cushion out with lowering springs as I like my ride just the way it is in that respect


BEFORE
http://i140.photobucket.com/albums/r38/jaycam0802/AudiA6-1.jpg (http://s140.photobucket.com/user/jaycam0802/media/AudiA6-1.jpg.html)

http://i140.photobucket.com/albums/r38/jaycam0802/frontwheel2.jpg (http://s140.photobucket.com/user/jaycam0802/media/frontwheel2.jpg.html)

http://i140.photobucket.com/albums/r38/jaycam0802/X6JYMAUDIA6106.jpg (http://s140.photobucket.com/user/jaycam0802/media/X6JYMAUDIA6106.jpg.html)




AFTER
http://i140.photobucket.com/albums/r38/jaycam0802/102.jpg (http://s140.photobucket.com/user/jaycam0802/media/102.jpg.html)

http://i140.photobucket.com/albums/r38/jaycam0802/103.jpg (http://s140.photobucket.com/user/jaycam0802/media/103.jpg.html)


Hope it helps some :beerchug:

[beavim]

Whilst I don't have an SE (I have S-Line) I do make the swap between 17 and 19 inch wheels every year. My summer wheels are 19" 7 twin spokes (255/35/19) and the winters are 17" from the SE (225/50/17). Rolling radius is near enough identical and both look OK without changing suspension although the 19's are by far my favourite. I will try and dig out some photos later.
I can't imagine that 19's would do anything to your cars look other than improve it (as long as you have decent looking wheels anyway 😀)

Sent from my Nexus 4 using Tapatalk

[beavim]

Here you go, taken in the spring during the swap to summers.

17's
http://img.tapatalk.com/d/13/12/04/zepyje5e.jpg

19's
http://img.tapatalk.com/d/13/12/04/e7uge5et.jpg

Only difference this year is that the 17's are also anthracite colour now 😁

Sent from my Nexus 4 using Tapatalk

[Mitchm71]

I think they should look OK. If it comes to it I will just get s line springs put in to reduce the wheel arch gap. Appreciate the information folks