grumpydave
07-09-2007, 09:33 AM
Hi everyone.
Bought a 1.9TD T4 last month which has needed a bit of work and the forum has been a really useful resource, thanks everybody.
Decided yesterday to replace the brake fluid as it was very, very dirty. Drove 50+ miles with no problem but then the brakes started binding all round (front gets hottest but evenly each side). :mad:
Sounds like pushing all the old oil out has led to a problem with the master cylinder, I've tested the servo and it seems OK. Any suggestions for other reasons for the brake binding would be greatly appreciated beore I go ahead and purchase a new master cylinder.
Bought a 1.9TD T4 last month which has needed a bit of work and the forum has been a really useful resource, thanks everybody.
Decided yesterday to replace the brake fluid as it was very, very dirty. Drove 50+ miles with no problem but then the brakes started binding all round (front gets hottest but evenly each side). :mad:
Sounds like pushing all the old oil out has led to a problem with the master cylinder, I've tested the servo and it seems OK. Any suggestions for other reasons for the brake binding would be greatly appreciated beore I go ahead and purchase a new master cylinder.