Tools needed to change A4 B5 1.9tdi PD AJM Cam belt

[gary321]

Hi all,
Can anybody point me to a list of tools needed to change my cam belt please, i have the belt kit and special tools needed for the belt, but i can't remember what allen keys torx bits and spanners i will need, i have a small set with hex and torx but i will need to buy stuff to match my 3/8 drive ratchet tomorrow for the pulley etc, please advise.
I'm also changing the water pump as well, plastic or metal?

Regards Gary

[towcestervag]

13mm spanner
15mm spanner
19mm spanner
18mm spanner
8mm allen key
6mm allen key
t45 torq
t30 torq
t25 torq
10mm socket

i only use either vw waterpumps which are plastic or airtek from gsf which are plastic
i have fitted the metal impellor pumps before but had a couple go faulty so dont use them anymore

[gary321]

Many thanks for taking the time to post towcestervag, i got a BGA CP3550 with bga code R012A in metal, so fingers crossed that it lasts longer than the plastic 1 i put in last year.
Also i'm dropping a video in that was very usefull to me that people may also find helpfull, the setting for the belt tesion gap is 4mm.


http://www.youtube.com/watch?v=PwZGG4VXxf0

[Doctle Odd]

Get some 12 point sockets too, very useful if the belt was last changed by an idiot that ruined the lock carrier bolts