PDA

View Full Version : P0299 Control Range Not Reached - Intermittent - MIL ON( Turbo fault)



Benoticed
26-07-2013, 09:48 AM
hi can any one confirm the following fault code from a reading taken from my Audi a3 2.0tdi ( CBA engine).I assume its sticky turbo vines /actuator. I have VAG rather VCDS now to read codes. Ive done the red hearing fixes N75, MASS air sensor & leaking vacuums. The fault always appears at 2250 revs in 6th gear doing 70mph + when I push down on the accelerator which over loads its and the glow plug light comes on. If left at the said speed for 10mintues engine management light comes on. Also anyone on Liverpool who can remove and clean the turbo unit? Thanks Robbie.

Sam
26-07-2013, 09:54 AM
16683/P0299/000665 - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/16683/P0299/000665)

Check the special notes section, in particular the latter half.

There's a CBEA and a CBAB engine, but not a CBA.

NHN
27-07-2013, 04:37 PM
Boost leak is my guess as its not reaching the requested boost level.