PDA

View Full Version : HELP: 2000 AKE allroad towed home AGAIN!! Advise required



bagpipingandy
13-06-2013, 06:50 PM
Hi All,
some help required please

My old trusty audi allroad, year 2000, 2.5Tdi AKE just broke down on way home from work tonight, was acceletaring hard off a roundabout and just died in 3rd gear about 3000rpm, turns over but no start, towed home, coil light starts flashing on towing, once home VCDS plugged in and scanned get these 2 faults:

2 Faults Found:
01318 - Control Module for Injection Pump (J399)
49-00 - No Communications
01268 - Quantity Adjuster (N146)
37-00 - Faulty
Readiness: N/A


faults cleared and no codes come back even after lots of cranking, is this normal codes not coming back? does the coil light only flash and store a code as the car was being towed?

so anyway 1st impression it looks like the fuel injector pump, but do you all agree? if so whats the recomended options: a recon one, or new unit and from who?

can i fit a 2nd hand one or does it need coding?

Im off to check belts are stll intact 1st!!

I appreciate any comments as its an old bus and, as everyone, I dont really want to throw huge money at it changing the wrong parts!! I dont like the idea the fault codes dont come back!!

Regards

Andy

PS: I aslo I owe my dad a new van, just ripped the towbar off his old rusty LDV in the last 100 yards of towing!!! :( :( Oh boy!!

kite
13-06-2013, 07:46 PM
I think diesel bob is the place for recon pump. Not cheap..
I would crack an injector and see if you have fuel.

bloody interweb phone.

bagpipingandy
13-06-2013, 09:39 PM
belts in tact,

cracked injector and get fuel out on cranking,

now code:

01268 - Quantity Adjuster (N146)
37-00 - Faulty

keeps returning

whats the opinions?

regards

Andy

Doctle Odd
13-06-2013, 09:51 PM
17970/P1562/005474 - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/17970/P1562/005474)

A4 2.5 TDI v6 Diesel Fuel pump not working? (http://www.vwaudiforum.co.uk/forum/showthread.php?45494-A4-2-5-TDI-v6-Diesel-Fuel-pump-not-working)

adamss24
13-06-2013, 09:58 PM
Take the pump off and send it to dieselbob for a rebuild...

vinpetrol
13-06-2013, 10:08 PM
Hi Andy
i think the injector pump is still on my old donor , I can enquire about it if you establish you need one .

Vin

bagpipingandy
13-06-2013, 10:25 PM
Hi All, thanks for all the info, I thought that would be the conclusion

Hi Vin, if you can check the part number of your old pump I would be interested in it as an option, any one know where the part number is?? I cant find it easily pump is still on the car can the part no be seen like this?

regards

Andy

vinpetrol
13-06-2013, 10:35 PM
Hi All, thanks for all the info, I thought that would be the conclusion

Hi Vin, if you can check the part number of your old pump I would be interested in it as an option, any one know where the part number is?? I cant find it easily pump is still on the car can the part no be seen like this?

regards

Andy
I will check and see if the guy has stripped it if so I ill be able to tell you where the number is

Vin

ametlib
15-06-2013, 09:52 PM
Pump nr. 059130106D or E ? If so it's plug and play, needs no coding. The insulation on the wires to the quantity adj. and the advance solenoid have a nasty habit to crack and fall off in pieces and

makes a short to ground sooner or later. Take the pump off and get a used unit from Ebay and check the insulation on theese wires very carefully.

bagpipingandy
16-06-2013, 09:02 PM
Update: The car tried to run with some easy start squirted in the intake, all timing checks out ok so Pump is now off, ready to send to diesel Bob, It is Part no 059 130 106 E which is plug and play on the older 2000 models as you say but there are no bargains out there just now so I will settle for a rebuild.
Many thanks
Andy

vinpetrol
17-06-2013, 10:09 PM
Update: The car tried to run with some easy start squirted in the intake, all timing checks out ok so Pump is now off, ready to send to diesel Bob, It is Part no 059 130 106 (tel:059 130 106) E which is plug and play on the older 2000 models as you say but there are no bargains out there just now so I will settle for a rebuild.
Many thanks
Andy
Hi Andy

i have contacted Steve the guy who has my old donor , I have asked him to give me the number on pump , It is the same year as yours so if you can afford the time it might be worth the wait. Will report back as soon as I hear from him

Vin

bagpipingandy
23-06-2013, 08:01 PM
Injector Pump refurbished and back from Diesel bob, back on the car last night and she fires up again running fine :), oh well, hopefully no more problems in the near future!! thanks for input and solutions, Andy