View Full Version : rashcupra's mk2 16v project!
rashcupra
25-08-2007, 06:49 PM
well ere are all the pictures of the beast untouched as i got her £400 ;)
http://i16.photobucket.com/albums/b9/rover25/IMG_7288.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7289.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7297.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7299.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7298.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7306.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7307.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7303.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7290.jpg
rashcupra
25-08-2007, 06:50 PM
and all the bad bits
http://i16.photobucket.com/albums/b9/rover25/IMG_7285.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7305.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7304.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7302.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7300.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7296-1.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7295.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7294.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7292.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7291.jpg
rashcupra
25-08-2007, 06:50 PM
few pics of a long starting process!!
http://i16.photobucket.com/albums/b9/rover25/IMG_7321.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7320.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7318.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7317.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7316.jpg
think im needing a new tailgate as the rust has spread badley inside! new o/s wing too and some welding on the rear pannel too also will need to get the car on a rampand overhaul the underside of the car de rusting welding and spraying ect! loads more too do ill keep reporting back with pics ;)
also quick question ive got the bigger brakets for the big bumper conversion do i use the re-enforcer bar and legs from the small bumpers to fit the big 1's?????
Oddball
25-08-2007, 08:59 PM
That's a pretty cracking car you've got there mate, should clean up to be a stunner. Pretty good dea for £400. :beerchug:
rashcupra
26-08-2007, 03:42 PM
well i got a 1.8 gti 16v
130,000 miles
big front bumper
big rear bumper
dtm scorpion full system exhaust
coilovers
for £400 i think is a argain there is abit of rust but nothing that cant be sorted im working on the csar every night im hooked on it and cant wait to have it mint and on the road :)
rashcupra
09-09-2007, 05:21 PM
big update for this project
bought some recarros for £180
http://i16.photobucket.com/albums/b9/rover25/DSC00010.jpg
de rusting the wind deflector in sunroof
http://i16.photobucket.com/albums/b9/rover25/IMG_7325.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7323.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7324.jpg
all sprayed
more pics of the wind deflector and brakets done :D
http://i16.photobucket.com/albums/b9/rover25/IMG_7327.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7328.jpg
ALL THE ENGINE BAY SPRAYED AND DONE
http://i16.photobucket.com/albums/b9/rover25/IMG_7402.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7403.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7404.jpg
rashcupra
09-09-2007, 05:22 PM
cant belive how good the radiator come out just with acid and HOT jet wash :)
http://i16.photobucket.com/albums/b9/rover25/IMG_7406.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7407.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7408.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7410.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7411.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7411.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7413.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7414.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7415.jpg
rashcupra
09-09-2007, 05:57 PM
few more pics ive got on my phone :)
http://i16.photobucket.com/albums/b9/rover25/DSC00049.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00046.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00043.jpg
spanny
09-09-2007, 07:15 PM
Looking very good rash matey, car is looking very clean and tidy now from the front, you manage to sort the tailgate out? or source a new one?
I love threads like this, shame the wife doesn't :D
rashcupra
10-09-2007, 10:06 PM
na not needing a new tailgate as it can be repaired its inside the tailgate thats rusty not the exterior side but CAN BE REPAIRED APPARANTLY :)
ive got a pannel beater coming round on thursday to have a propper look at all the pannel/derusting work that needs to be done and quote me a mates rates to do the work after all the dents are removed and the rust is gone she will be booked in for the jade green (same colour) respray
rashcupra
16-09-2007, 03:12 PM
here are a few quick photos to give a VERY rough idea of what it will look like still at a holt with this project till the car gets pannel work sorted next week!
THE RED TAPE ON GRILL ISNT FINISHED JUST AN IDEA!
http://i16.photobucket.com/albums/b9/rover25/DSC00065.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00064.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00063.jpg
heres the new handle nex to old
http://i16.photobucket.com/albums/b9/rover25/DSC00061.jpg
spanny
16-09-2007, 09:22 PM
looking ace rash, should be v.nice when its all done, still cant belive how much you done in such a short space of time though, mucho respect.....
rashcupra
16-09-2007, 10:38 PM
not alot if i had a massive garage i know i would have the interior vertually finished too by now but i dont have the space to rip the exterior and the interior apart :( got a pannel beater coming round next week to evaluate how long and when bodywork will be completed just wants beers and takeaways for doing the job! which is awesome! then respray in november then get cracking on the interior! will be drivable when exteror is together
rashcupra
20-09-2007, 10:45 PM
had anouther mate/pannel beater round and he is happy to do the work and had a diffrent opinion to the other pannel beaters opinions so its all good! all dents/scratches/rust/rot are outlined and highlighted :) im away this weekend fixing the flamin beezer so will get started on the scratches and dents after work next week monday/tuesday maybe wednesday then on thursday/friday and the saturday maybe into next week will be welding up the mouding holes single wiper convertion smooth rear pannel badge holes and tailgate wiper and washer jet de rotting the arches weld shut the areial hole on n/s wing so quite alot ;)
got the cupra interior delivered yesterday and is in mint condition can sense it being an **** to fit them but will be so worth it! aint seen cupra seats in a golf :D also bought some g60 arches and sideskirts last night for £110 ;) so is all taking shape now :)
spanny
20-09-2007, 11:03 PM
had anouther mate/pannel beater round and he is happy to do the work and had a diffrent opinion to the other pannel beaters opinions so its all good! all dents/scratches/rust/rot are outlined and highlighted :) im away this weekend fixing the flamin beezer so will get started on the scratches and dents after work next week monday/tuesday maybe wednesday then on thursday/friday and the saturday maybe into next week will be welding up the mouding holes single wiper convertion smooth rear pannel badge holes and tailgate wiper and washer jet de rotting the arches weld shut the areial hole on n/s wing so quite alot ;)
got the cupra interior delivered yesterday and is in mint condition can sense it being an **** to fit them but will be so worth it! aint seen cupra seats in a golf :D also bought some g60 arches and sideskirts last night for £110 ;) so is all taking shape now :)
Jeesus christ mate lol, you have been busy spending the cash havent you hehehe, anyways, shouldnt you be in bed by now? as you got an early start tomorrow.
Ill meet jct 18 in the morning matey..... got the readies now aswell :D
See ya tomorrow ;)
rashcupra
22-09-2007, 11:35 PM
have bought a tonne of stuff got this all through the post today for the golf ive got
m3 style rear lights
strut brace
gti mouldings
g60 arches
sideskirts
got all this for £160 absoloute BARGAIN!!!!!!!!!!!!
will be starting on bodywork next week ;)
spanny
23-09-2007, 03:18 PM
Did you have a good night out up chesterfield on friday matey? jbs get your car all done for saturday? any better????
Just did the springs on the arosa today with gazjones, it looks mint, absolutly slammed on its *** hehehe
rashcupra
25-09-2007, 04:23 PM
well didnt go out in cheterfield in the end as the young taxi driver and the young lass in the travel lodge sed that sheffield is better on a friday night so went there in the end and it was the biggest pile of goat poo ive ever done exstreamly boring no hot girls and crap night life waste of money lol
jbs worked hard on getting the work done in the two days and got all the work done gaskets mounts and changed the slave cylinder on the clutch but this didnt fix the problem so im replacing the master cylinder when i have time ;) but other than that its running sound as a nut and am very happy again hope that the engine mounts will stop it happening again as the 5th gasket would be a joke!!!!! the old engine mounts that came out where absoloutly goosed!!!
back on topic the golf has taken great shape il upload some pics :)
rashcupra
25-09-2007, 04:32 PM
had alot of the dents done today a few need a second go as they are slightly bigger dents but here are a few shots of the new parts and bodywork should have bodywork done by saturday :)
http://i16.photobucket.com/albums/b9/rover25/DSC00084.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00083.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00082.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00078.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00077.jpg
single wiper convertion (well a calved up standard1 :lol:
http://i16.photobucket.com/albums/b9/rover25/DSC00079.jpg
g60 arches
http://i16.photobucket.com/albums/b9/rover25/DSC00080.jpg
m3 rear lights
http://i16.photobucket.com/albums/b9/rover25/DSC00081.jpg
rashcupra
25-09-2007, 04:33 PM
cupra interior
http://i16.photobucket.com/albums/b9/rover25/DSC00072.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00071.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00070.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00067.jpg
People pay money for this look
http://i16.photobucket.com/albums/b9/rover25/DSC00082.jpg
and completely off topic, Rover25?! Please tell me that's a nickname or someone elses photobucket account!
spanny
25-09-2007, 05:22 PM
Nice rash, how much did them little beauties set you back?
rashcupra
27-09-2007, 10:50 PM
£100 for the seats :) absoloute bargain and
mycarsavw i opened this account when i was like 17 and foolish my first ever car was a rover 25 :( but never got round to getting a new account so il stick with the granny name but i can assure you ive been vag crazy and alaways will be for the last 3years im aloud to make 1 misstake lol
rashcupra
04-10-2007, 11:00 PM
loads done tonight had alot of the holes and rust and badges washer jet holes ect welded up and smoothed anyway pics :) will be doing loads after work too :)
http://i16.photobucket.com/albums/b9/rover25/DSC00095.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00098.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00099.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00112.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00111.jpg
just needs rubbing down then thats anouther bit done :)
rashcupra
04-10-2007, 11:01 PM
http://i16.photobucket.com/albums/b9/rover25/DSC00100.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00110.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00103.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00102.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00113.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00114.jpg
heres the single wiper convertion and de aerialed the wing too once angain just needs rubbing down so il be smoothing the doors and 1/4 pannels tomorrow YAY!
dollars
12-10-2007, 10:28 PM
This is looking sweet mate, what plans do you have for the engine?
rashcupra
14-10-2007, 12:47 AM
mint standard run around mate knowing me it will have an r32 or a type r engine not sure lol
rashcupra
14-10-2007, 11:51 AM
a very kind friend lent me his compressor yesterday so managed to get a bit more work done
ive smoothed the aerial off as wont be wanting a radio :D and smoothed all the moulding holes off on the doors 1/4 pannels done more on the dents ect
now need to modify the arches for the 9j borbet wheels squeezing in there and cut rust out of 1/4 panel and weld new metal in and repair the break in damage on the n/s door and thats about it anyway pics speak more than words so here are a few more pics
http://i16.photobucket.com/albums/b9/rover25/DSC00129.jpg
all windows ect out/off
http://i16.photobucket.com/albums/b9/rover25/DSC00128.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00126.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00127.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00130.jpg
heres the aerial smooth
http://i16.photobucket.com/albums/b9/rover25/DSC00125.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00131.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00132.jpg
A BEAST WAITING TO BE UNLEASHED!
http://i16.photobucket.com/albums/b9/rover25/DSC00134.jpg
rashcupra
25-12-2007, 09:56 PM
HAVENT UPDATED FOR AGES! missing a few updates but hey :)
got some work done on the golf! the weather held out and wasnt toooooo cold
had the tyres (toyo proxes4 put on yesterday for £30 BARGAIN! as had special bike valves and special tool to get the tyres pumped up as i wanted a bit of stretch!
http://i16.photobucket.com/albums/b9/rover25/DSC00192.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00193.jpg
so the first thing this morning was to get the wheels on to see how much arch pulling was needed and just couldnt genrally wait to see what they looked like!
http://i16.photobucket.com/albums/b9/rover25/DSC00199.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00196.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00197.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00198.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00200.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00201.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00202.jpg
as the stretch on the tyres gives the arches better clearance they were only needed to be pulled a couple of inches!!
rashcupra
25-12-2007, 09:57 PM
here is the ledgendary tool that pulls the arches out!
http://i16.photobucket.com/albums/b9/rover25/DSC00204.jpg
the arches were pulled out 2 ish inches all around so their is nice clearance! they were also rolled so the lip wouldnt reck the rubber.
http://i16.photobucket.com/albums/b9/rover25/DSC00211.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00210.jpg
then we hit the bodywork cleaning up all the repairs and genrally getting it ready for primer! looks amazing really see it coming together!
heres a few more pis to show you the progress today
http://i16.photobucket.com/albums/b9/rover25/DSC00205.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00206.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00203.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00207.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00208.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00209.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00212.jpg
rashcupra
25-12-2007, 09:57 PM
and even more!
http://i16.photobucket.com/albums/b9/rover25/DSC00213.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00214.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00215.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00216.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00216.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00217.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00218.jpg
rashcupra
25-12-2007, 09:58 PM
some lil door speakers getting bits ready for when i hit the interior!
http://i16.photobucket.com/albums/b9/rover25/DSC00219.jpg
been playing around with the door cards last night this is what ive done to them!
stripped them down and hoovered/cleaned then using a liht coat of normal black paint have turned theminto this :) still feels like fabric just not a granny dirty grey anymore! this should really improve the interior when i get to it also fitted the speakersinto them.
FRONT'S VVVVVV
http://i16.photobucket.com/albums/b9/rover25/DSC00225.jpg
REAR'S VVVVVV
http://i16.photobucket.com/albums/b9/rover25/DSC00223.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00224.jpg
END PRODUCT :)
http://i16.photobucket.com/albums/b9/rover25/DSC00227.jpg
rashcupra
26-12-2007, 08:22 PM
well after layiyin bed till 1ish i decided not to be lazy and get some more bits done on the beast
ive grinded off as much of the rust as possible in the arches and have sanded it all down primed it and stone chip blacked all the arches out
stop the arches rotting out anytime soon :)
CHECK OUT THE BAD BOY ROT :(
http://i16.photobucket.com/albums/b9/rover25/DSC00228.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00235.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00235.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00234.jpg
HERE IS WHAT ALL THE ARCHES LOOK LIKE NOW vvv
sealed all the rolled arches up and stone chipped all inner arches on all four corners
http://i16.photobucket.com/albums/b9/rover25/DSC00231.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00233.jpg
took a while to do and got covered in sealer but JOB DONE!
should also have 3-4 deliverys this week with loadsa new parts :D
Oddball
27-12-2007, 08:11 AM
Man I love seeing a car coming together. Top notch mate:beerchug: really can't wait to see it finished.
rashcupra
29-12-2007, 07:48 PM
thanks mate!!!!^^^^^^
ive been working on it all day again today put anouther layer of sealer in the arches on the rolled arches and gave the arch wells/inner wings anouther thick layer of stonechip black to eliminate ANY new rust! also finally finished EVERY REPAIR :funk: all that needs doing is sand the overspray down and rub bumpers down for primer! PREP DONE!!!! (BIG BIT)
im picking up some exstreamly exspensive coilovers tomorrow and also ive bought some new doors with audi handles welded in :cheeky: to be extra diffrent! costly but will both be well worth it!
got the painter popping over next saturday to prime the whole car :D finally getting closer to the repaint!
before saturday ive got to modify my arch trims (g60 arches) to clear the wheels and repaint them textured black. fit the large service kit ive bought and the new radiator with coolant! alot to do but slowly getting there pointless puttin pics up of progress looks sorta the same as last pics
onzarob
29-12-2007, 09:03 PM
Looking really nice, keep the updates and photos coming:D
I love the wheels ;)
rashcupra
31-12-2007, 12:55 AM
picked up my spax rsx coilovers today retail at £620 and got them for £200 second hand in good condition but i want them to look BRAAND NEW so ive dismantled them and im respraying all the parts will post pics when im finished :) the audi doors had modifyed door hinges to fit is horrid lambo hinges so didnt get them in the end :(
rashcupra
05-01-2008, 06:40 PM
fitted the new radiator today and fresh coolant and cleaned all the sensors up ect
http://i16.photobucket.com/albums/b9/rover25/DSC00268.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00269.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00270.jpg
also had more primer work done today no pics of this as its too dark and raining now!
car is all booked in at my work for repaint on friday 11th january :funk: will be checked over, blocked down, de-greased and masked up friday then painted on the saturday and left to dry/harden over the rest of the weekend on the monday it will then get de masked and then can get my teeth really stuck in
(^^^in an IDEAL WORLD but i know it probably wont work out like this!!!!!^^^) but it is booked in
heres a few more pics to keep you happy :shrug:
below are all the bits that are getting ready for paint
http://i16.photobucket.com/albums/b9/rover25/DSC00274.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00271.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00272.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00273.jpg
Oddball
06-01-2008, 03:57 AM
Sweet, what colour you going for again?
rashcupra
15-01-2008, 10:24 PM
standard jade green ;) love jade green its rare and ive never seen a big bumper 1! so im defo staying jade green
should be sprayed VERY VERY SOON!
i have some pics to share.
here is the rear pannel smooth
here is what they used to look like
http://i16.photobucket.com/albums/b9/rover25/DSC00280.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00281.jpg
i then picked all the wax/sealer out
http://i16.photobucket.com/albums/b9/rover25/DSC00282.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00283.jpg
then welded it up
http://i16.photobucket.com/albums/b9/rover25/DSC00292.jpg
grinded it back and then smoothed over with fiiller then primer
http://i16.photobucket.com/albums/b9/rover25/DSC00293.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00294.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00295.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00296.jpg
rashcupra
15-01-2008, 10:25 PM
also moded the g60 arches by cutting the moudings off and smoothing the gap of retextured it an painted them :)
you can see where ive welded new plastic to fill the whole where i cut the mouldings off
http://i16.photobucket.com/albums/b9/rover25/DSC00277.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00276.jpg
heres the service kit
spark plugs
oil
fuel filter
oil filter
air box element
http://i16.photobucket.com/albums/b9/rover25/DSC00279.jpg
here is the new front bumper big chin spoiler £60 bloody quid :-o
http://i16.photobucket.com/albums/b9/rover25/DSC00299.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00278.jpg
rashcupra
15-01-2008, 10:46 PM
in the first pic you can see the top hole has a dent and a hole at the bottom the g60 arches tht ive modded not to have mouldings coming off of them show this dent/hole so have smoothed this off in second pic :rolleyes:
http://i16.photobucket.com/albums/b9/rover25/DSC00284.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00300.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00303.jpg
g60 arches finished and like BRAND NEW
http://i16.photobucket.com/albums/b9/rover25/DSC00306.jpg
drilled and grooved discs all round and new pads
http://i16.photobucket.com/albums/b9/rover25/DSC00307.jpg
<drool>
I can't wait to see some pics of the entire car.
That smoothed rear bumper is lovely.
rashcupra
21-01-2008, 10:33 PM
ll update on the paint situation, Its been primed completelty and the doors bonnet and tailgate have been removed and primed and started to be rubbed down
should be done by now but WILL probably be finished this weekened or for DEFINATE the next!
here are some pics to keep you occupied anyways
here is a pic of my baby being picked up
.http://i16.photobucket.com/albums/b9/rover25/DSC00301-2.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00300-2.jpg
and here are some pics of her in the bodyshop
http://i16.photobucket.com/albums/b9/rover25/DSC00324.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00307-2.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00305-2.jpg
.
and here is some pics of her all primed and naked of pannels
http://i16.photobucket.com/albums/b9/rover25/DSC00319-1.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00320-1.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00322.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00323.jpg
rashcupra
21-01-2008, 10:35 PM
cut the fog blancs out of the front bumper as i didnt like it with
http://i16.photobucket.com/albums/b9/rover25/DSC00303-2.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00304-2.jpg
sideskirts repainted matt black to match arch colour
http://i16.photobucket.com/albums/b9/rover25/DSC00310.jpg
more pics soon i promise!
rashcupra
08-02-2008, 08:47 PM
well car got resprayed about a week ago and theyve done an awesome job looks GREAT!
http://i16.photobucket.com/albums/b9/rover25/DSC00343.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00341.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00339.jpg
well stuck the side skirts on tonight dont have pictures as it got dark before i finished!
here are picsof the arches on
should get some more pics tomorow as ive got the full day on her :) :D I aim to get the windscreen in, the sunroof in, both doors fitted up.
few pics
http://i16.photobucket.com/albums/b9/rover25/DSC00359.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00366.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00362.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00361.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00358.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00363.jpg
onzarob
08-02-2008, 09:55 PM
Looking good;):beerchug:
johnyelland1234
28-02-2008, 03:17 PM
very nice
Oddball
10-03-2008, 11:47 PM
Haven't seen a post for a whiley mate. How's everything coming along?
rashcupra
23-03-2008, 11:30 AM
LOADS HAS HAPPENED my thread got temporary closed but i had it re opened :)
ive taken some snaps of the NEARLY comleted exterior
still needs to be lowered more,grill needs red line doing properly and needs fitting properly aswell, number plate surrounds and roof mouldings thats about it!
here they are anyway hope you all like it as it has been a long time coming! STILL NOWHERE NEAR THE END OF THE PROJECT AS
INTERIOR
SUSPENSION
ENGINE
ELECTRICS/ALARM
SMALL SOUND SYSTEM
EXHAUST
here are my new mirrors
http://i16.photobucket.com/albums/b9/rover25/IMG_7648.jpg
LOVE THE NEW HANDLES!
http://i16.photobucket.com/albums/b9/rover25/IMG_7649.jpg
found this rott on the underside of the sunroof AND the inside of the door where it was broken into this has been grinded back to bare metal and resprayed.
http://i16.photobucket.com/albums/b9/rover25/DSC00378.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00381.jpg
here are my new sill trims!
http://i16.photobucket.com/albums/b9/rover25/DSC00379.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00380.jpg
all grimey catches
http://i16.photobucket.com/albums/b9/rover25/DSC00376.jpg
much better
http://i16.photobucket.com/albums/b9/rover25/DSC00377.jpg
rashcupra
23-03-2008, 11:31 AM
the full shots uve been waiting for
http://i16.photobucket.com/albums/b9/rover25/DSC00374.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00375.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7656.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7659.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7653.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7650.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7647.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7652.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7651.jpg
http://i16.photobucket.com/albums/b9/rover25/IMG_7658.jpg
rashcupra
23-03-2008, 11:32 AM
well i finaly have internet but it only works for like 20 mins a day so il have to be quick!
over the last week or so ive been working hard on the golf ive ripped all the old interior out and have been fitting my gti mk4 recaros in the front (NIGHTMARE OF A JOB!) they will look SPOT ON tho when they are in just cusom making brakets and cutting and wellding on seats to make them work!
Old rears
http://i16.photobucket.com/albums/b9/rover25/DSC00405.jpg
new rears
http://i16.photobucket.com/albums/b9/rover25/DSC00406.jpg
bottom of front seat modifying (cut arms off and reweld in new position)
http://i16.photobucket.com/albums/b9/rover25/DSC00409.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00410.jpg
http://i16.photobucket.com/albums/b9/rover25/P3080006.jpg
http://i16.photobucket.com/albums/b9/rover25/P3080007.jpg
ive also de rotted the front corners of the shell behind the wings as they were rotten
http://i16.photobucket.com/albums/b9/rover25/DSC00416.jpg
also front wings where not as wide as the plasic arch trims so ive rolled them right out so i can go extra low!
http://i16.photobucket.com/albums/b9/rover25/DSC00418.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00419.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00417.jpg
rashcupra
23-03-2008, 11:33 AM
de rotted inside the car on the rear struts and along door sills inside (all black painted bits)
and fitted my BRAND NEW GENUINE door and boot rubbers £160 AAAAOOOCCCCHHH
http://i16.photobucket.com/albums/b9/rover25/P3020013.jpg
http://i16.photobucket.com/albums/b9/rover25/P3020015.jpg
http://i16.photobucket.com/albums/b9/rover25/P3020008.jpg
http://i16.photobucket.com/albums/b9/rover25/P3020009.jpg
ive then bought a peach of a mk2 golf for spares yesterday
vr6 2.9 v6 engine (rebuilt)
kent cams
larger inlet
corrado subframe (rare/exspensive as hell)
G60 bigger front calipers
braided hoses
lower arms with all round uprated bushes
engine loom
car loom
dash loom
hydraulic pedal box
gear lincage
lots of reciepts of work done on engine
also has loads of spares that i will make money back on like g60 arches door mouldings windows ect ect! this lot is well worth over £1500 got it all for £400!
http://i16.photobucket.com/albums/b9/rover25/DSC00436.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00438.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00439.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00440.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00431.jpg
rashcupra
23-03-2008, 11:34 AM
so me and mate Ben got to work the same night on taking my 16v engine and everything with it that need uprating out!
everything is now off my mk2
exhaust
pedal box
sterring collum
COMPLETE front supension/brakes ect
driveshafts
engine
gearbox/clutch
engine wiring looms
car looms
brake servo
water bottles
gear linkages
cables ect ect
http://i16.photobucket.com/albums/b9/rover25/DSC00430.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00432.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00429.jpg
engine and supension coming out all in 1 go!
http://i16.photobucket.com/albums/b9/rover25/DSC00420.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00424.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00426.jpg
now it looks like this! VV
http://i16.photobucket.com/albums/b9/rover25/DSC00428.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00427.jpg
next step is getting new wiring in whole of car and engine headlight ect loom, gear linkage on and hydraulic pedal box on as well
really enjoying this project now!
rashcupra
23-03-2008, 11:35 AM
internet is pants in my new house so cant stay connected long enough to upload pics ect but
painted LOADS AND LOADS of bits stripped everything off my donor car eg
G60 Big brakes
driveshafts
corrado subframe
lower arms
steering knuckles
shocks
arb
hydraulic clutch pluming and mechanism
power steering pipes and rack
as im fussy i wanted all this pulled apart and rubbed down cleaned and painted its taking me ages but will look top when its all painted
ive bought
sachs clutch kit
net top mounts for front suspension
front bearings
6 branch stanless steel manifold
jettex full system exhaust
loads of rubbers and missing trims (new)
g60 brake pads
fk coilovers
g60 corrado HUGE front radiator
samco 7 pipe silicone hose kit (black)
SO SO SO MUCH more to do!
but may have engine bolted in this weekend and most of the suspension in wiring looms have half been swapped still nee to fit the fuse box and dash looms ect
ive got loads of pictures and will upload them asap!
rashcupra
23-03-2008, 11:36 AM
loads more done engine is out of donor car and sachs clutch is fitted gear box has been cleaned and painted black (looks the nuts) engine is half stripped down so i can send some bits off to be powder coated and genrally check out theinternals and it is MINT inside! new chains cams ect ect as was stated so fingers cross should run GREAT! alsopainted the rest of the suspension. rubbed down and painted the COMPLETE engine bay and re stonechipped the underside (front of the car, G60 brakes are now red, just started rubbing down the engine for some good old hammerite loving :lol: will update with pics asap! probably tonight :)
onzarob
23-03-2008, 09:12 PM
http://i16.photobucket.com/albums/b9/rover25/DSC00374.jpg
I'm in love, what a beauty, those wheels are just sublime on that car:beerchug::fing02:
http://i16.photobucket.com/albums/b9/rover25/DSC00374.jpg
I'm in love, what a beauty, those wheels are just sublime on that car:beerchug::fing02:
Those wheels are gorgeous, the car is stunning - excellent work
rashcupra
26-03-2008, 12:53 AM
thanks for the comments yeah im happy with the way its turned out so far but still far from finished :( GOT LOTS TO UPDATE FROM THESE LAST FEW POSTS JUST WANNA GET THE ENGINE BACK IN FIRST :) VR6 2.9 soon to be supercharged is on route! :D
VR6 2.9 soon to be supercharged is on route! :D
<drool>
rashcupra
29-03-2008, 12:25 AM
lil update for you all!
last week sometime got the following bits done
removed everything from front end of donor car to get it cleaned painted and reasembled on my golf
power steering conversion
http://i16.photobucket.com/albums/b9/rover25/DSC00462.jpg
lower arms
http://i16.photobucket.com/albums/b9/rover25/DSC00459.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00470.jpg
sub frame
http://i16.photobucket.com/albums/b9/rover25/DSC00460.jpg
G60 calipers
http://i16.photobucket.com/albums/b9/rover25/DSC00461.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00467.jpg
front cross members
http://i16.photobucket.com/albums/b9/rover25/DSC00447.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00446.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00480.jpg
gear lincage/box
http://i16.photobucket.com/albums/b9/rover25/DSC00445.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00451.jpg
slave cylinder and starter motor
http://i16.photobucket.com/albums/b9/rover25/DSC00463.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00468.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00469.jpg
steering knuckles
http://i16.photobucket.com/albums/b9/rover25/DSC00473.jpg
new bearings now repainted too
http://i16.photobucket.com/albums/b9/rover25/DSC00482.jpg
looks like this all together the front suspension
http://i16.photobucket.com/albums/b9/rover25/DSC00472.jpg
here are some new bits that ive bought
G60 discs new pads as well
http://i16.photobucket.com/albums/b9/rover25/DSC00486.jpg
rashcupra
29-03-2008, 12:30 AM
vr6 corrado rad/sensor
http://i16.photobucket.com/albums/b9/rover25/DSC00481.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00458.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00457.jpg
ive taken my complete 80 spec wiring loom out and changed it all for 90 spec also fitted mk3 dials
http://i16.photobucket.com/albums/b9/rover25/DSC00483.jpg
stone chipped front end under side
http://i16.photobucket.com/albums/b9/rover25/DSC00455-1.jpg
then repainted complete engine bay
http://i16.photobucket.com/albums/b9/rover25/DSC00466.jpg
then refitted everything wiring servo ect
looks a bit like this at the mo suspension all in via coilovers wiring tidyed up and brake system
http://i16.photobucket.com/albums/b9/rover25/DSC00487.jpg
then got started on tidying up the engine
http://i16.photobucket.com/albums/b9/rover25/DSC00478.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00479.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00475.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00476.jpg
gearbox
http://i16.photobucket.com/albums/b9/rover25/DSC00458-1.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00460-1.jpg
new clutch
http://i16.photobucket.com/albums/b9/rover25/DSC00457-1.jpg
new alternator belt to go on, here is what it currently looks like
http://i16.photobucket.com/albums/b9/rover25/DSC00484.jpg
sent rocker cover and inlet manifold away to get powder coated could have engine in this weekend but cant untill my new 6 branch manifold is here
other goodies ive bought involve
ram air induction kit
jettex exhaust system
de cat pipe
black samco silicone hoses
fk coilovers with new top mounts
wont be long till shes alive!
mluton
29-03-2008, 02:22 AM
Keep on with the great work, Thread kept me occupied for ages
macmillions
06-04-2008, 01:10 AM
Wow, what an outstanding car!
I got a bargain myself, 1.8 GL 8v for £380.
U have given me serious incentive to actually splash the cash 2 get it to top notch!
Haha, fancy doing it for me?
:biglaugh:
RickT
08-04-2008, 07:43 PM
Great car mate..
This is one of the best project threads i have read in a long time!!
Well done!
Rick
rashcupra
08-04-2008, 11:37 PM
lil update,
loads of before and after pics!
http://i16.photobucket.com/albums/b9/rover25/DSC00462-1.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00488.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00461-1.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00489.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00492.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00486-4.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00487-1.jpg
New fk coilovers VVV
http://i16.photobucket.com/albums/b9/rover25/DSC00487-2.jpg
new 6 branch manifold
http://i16.photobucket.com/albums/b9/rover25/DSC00488-1.jpg
now the exhaust manifold has turned up i can get the engine in and running by tomorrow night! updates soon!
dent in chassis leg has been made and painted to give clearance on the engine pully everything is ready to go!!!!!
rashcupra
08-04-2008, 11:37 PM
engine is in and running now :D
rashcupra
15-04-2008, 11:03 AM
lil quick update then
ive trapped a nerve in my neck so im vertually paralised at the moment and cant work on the car which is exstreamly annoying and frustrating! but i have a few pics to show
nice weather for putting the VR in
http://i16.photobucket.com/albums/b9/rover25/DSC00490-1.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00492-1.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00493-1.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00494-1.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00496.jpg
half there
http://i16.photobucket.com/albums/b9/rover25/DSC00502.jpg
new coilovers and brakes ect in!
PLEASE NOTE THESE DISCS ARE NOW ON THE RIGHT WAY NOW!!! VVVhttp://i16.photobucket.com/albums/b9/rover25/DSC00497.jpg
http://i16.photobucket.com/albums/b9/rover25/DSC00500.jpg
R.I.P the donnor mk2 gave me so much!
http://i16.photobucket.com/albums/b9/rover25/DSC00504.jpg
rashcupra
25-04-2008, 11:56 PM
lil update for you all!
engine bay has been tidyed up (wires ect) and also gave the bodywork a good ol clean as shes a lil dusty!
http://i16.photobucket.com/albums/b9/rover25/P4200027.jpg
http://i16.photobucket.com/albums/b9/rover25/P4200019.jpg
http://i16.photobucket.com/albums/b9/rover25/P4200020.jpg
http://i16.photobucket.com/albums/b9/rover25/P4200021.jpg
http://i16.photobucket.com/albums/b9/rover25/P4200024.jpg
http://i16.photobucket.com/albums/b9/rover25/P4200025.jpg
http://i16.photobucket.com/albums/b9/rover25/P4200026.jpg
http://i16.photobucket.com/albums/b9/rover25/P4200023.jpg
new rear wheel bearings have been fitted along with the drilled and grooved discs and gave the rear calipers a clean up and paint.
before V
http://i16.photobucket.com/albums/b9/rover25/P4170009.jpg
after V
http://i16.photobucket.com/albums/b9/rover25/P4190014.jpg
rashcupra
25-04-2008, 11:57 PM
exhaust and de cat pipe has turned up
de cat
http://i16.photobucket.com/albums/b9/rover25/P4230029.jpg
exhaust
http://i16.photobucket.com/albums/b9/rover25/P4230028.jpg
fitted
http://i16.photobucket.com/albums/b9/rover25/P4230030.jpg
http://i16.photobucket.com/albums/b9/rover25/P4230031.jpg
rear bearing kit
http://i16.photobucket.com/albums/b9/rover25/P4190010.jpg
just today came home and found these bad boy silicone hoses (5 weeks wait)
http://i16.photobucket.com/albums/b9/rover25/P4250032.jpg
http://i16.photobucket.com/albums/b9/rover25/P4250033.jpg
this is not the ride height ive chosen it will be lower when im done!
another update at the end of the weekend as i should have the rad in and coolant pipes on and could maybe even have a video of the engine running.
i also have the golf booked in for an all sing all dancing alarm system to be wired in next wednesday and will be picking up my exspensive red HT leads tomorrow
NOT LONG NOW!
<mouth open>
Dude this is going to be BIG :)
bora(ing) nick
28-04-2008, 01:44 PM
Impressive....
rashcupra
28-04-2008, 11:44 PM
another update for you all
ive now fitted all the samcos and im chuffed i went for black ones as they blend in nicely i think! very annoyed about 1 of my BRAND NEW HAND MADE magnicor ht leads was broken they cost me so much!! so dont go asking why do i have a random black HT lead in amongst the red ones! anyway here are some pictures of the engine bay with the covers on, coolant bottle in, samcos and with rad in!
http://i16.photobucket.com/albums/b9/rover25/P4270001.jpg
http://i16.photobucket.com/albums/b9/rover25/P4270002.jpg
http://i16.photobucket.com/albums/b9/rover25/P4270009.jpg
then i went about at fitting my renault twin fans on the front!
http://i16.photobucket.com/albums/b9/rover25/P4270003.jpg
fan brackets modifyed and ready to be painted
http://i16.photobucket.com/albums/b9/rover25/P4270005.jpg
here they are they're realy powerful and will do more than the job!
http://i16.photobucket.com/albums/b9/rover25/P4270012.jpg
http://i16.photobucket.com/albums/b9/rover25/P4270010.jpg
i then had to modify and repaint the front pannel so that they would fit.
http://i16.photobucket.com/albums/b9/rover25/P4270004.jpg
front pannel is wet not a dodgey paint job!
http://i16.photobucket.com/albums/b9/rover25/P4270014.jpg
http://i16.photobucket.com/albums/b9/rover25/P4270015.jpg
rashcupra
28-04-2008, 11:45 PM
also finished all the wiring
before V
http://i16.photobucket.com/albums/b9/rover25/P4200022.jpg
after V
http://i16.photobucket.com/albums/b9/rover25/P4270008.jpg
bled the brakes and the clutch and it now moves again!
this week i hope to have the
fans wired up and working
majority of interior fitted in
dash board re-fitted
alarm fitted
electric windows & central locking working
front end on
things left to do after this ^^^ are
roll the rear arches more
fit the front seats
fit sound system
adjust tracking and coilovers
polish new paint
mot
tax
insurance
ENJOY!
Renault fans? Brave man considering every French car I've ever had the displeasure of driving (many many times) or owning (once, I'm sorry) has overheated :biglaugh:
rashcupra
29-04-2008, 06:20 PM
ive ran power through them and they seem more than capeble of the job! but its a shame theyre french! if anything fails itl be the fans LOL!
rashcupra
03-05-2008, 12:42 AM
small update
ive had the alarm professionally fitted and im very happy with it has warning churps if you go near it and a few other nifty gadgets anouther thing done!
http://i16.photobucket.com/albums/b9/rover25/P5010001.jpg
having to wait till next week to have the cenral locking fitted as im ditching the mk2 origional pants pump operated system! also electric windows are being sorted aswell when hes here. as the new loom i put in simply doesnt have plugs for the electric windows or central locking?
bumper is just slipped on in these pics to check it cleared the fans (which it does) just pulled jade out to give her a much needed clean!
http://i16.photobucket.com/albums/b9/rover25/P5020002.jpg
http://i16.photobucket.com/albums/b9/rover25/P5020003.jpg
http://i16.photobucket.com/albums/b9/rover25/P5020007.jpg
http://i16.photobucket.com/albums/b9/rover25/P5020008.jpg
http://i16.photobucket.com/albums/b9/rover25/P5020010.jpg
http://i16.photobucket.com/albums/b9/rover25/P5020012.jpg
http://i16.photobucket.com/albums/b9/rover25/P5020020.jpg
im also VERY concerned if the bonnet will actually touch! and this woulldnt be a problem if the 6 branch manifold wasnt 1 cm away from the arb as i would lower the rear engine mounts but as arb is there this will make mani rattle so im not sure what to do there!
its the rear drivers side corner of the engine that needs dropping a cm
or 2!
http://i16.photobucket.com/albums/b9/rover25/P5020016.jpg
rashcupra
04-05-2008, 11:04 AM
another lil update :D
i really had to sort these VVV rear arches outyou can see the lip from the g60 arch and then a rolled metal lip from the 1/4 pannel, they were very dangerous as ive stretched the tyres onto my rims the side wall was directly above the 1/4 pannel lip and if i was to go over a bump it would pull the tyre of the rim no problem.
http://i16.photobucket.com/albums/b9/rover25/P4190018.jpg
so yesterday i set about sorting them out firsty i cut the metal out which obviously took a while as my arches are stuck on and cant be removed
http://i16.photobucket.com/albums/b9/rover25/P5030003.jpg
http://i16.photobucket.com/albums/b9/rover25/P5030005.jpg
here is what the arches looked like inside with the 3 skins
http://i16.photobucket.com/albums/b9/rover25/P5030004.jpg
i then cut slits around whole arch then etched the metal so no rust would return, then hamered the metal into g60 arch and then smothed it all of with windscreen sealer its given me about 3/4 inches extra dropping ability so im chuffed!
http://i16.photobucket.com/albums/b9/rover25/P5030007.jpg
http://i16.photobucket.com/albums/b9/rover25/P5030006.jpg
then stuck the bonnet on to see what needed modifying and couldntresist a pic
http://i16.photobucket.com/albums/b9/rover25/P5030009.jpg
http://i16.photobucket.com/albums/b9/rover25/P5030008.jpg
mk2gti_houch7
11-05-2008, 08:28 PM
Im going to have a read through the whole thing when i get the chance, but from what i saw its Lookin V SWEET!!!!!!!
L
rashcupra
13-05-2008, 09:16 PM
havent updated for a while with pics so here is the progress that has been done
the intererior is all in floor carpets trimse ect and front seats are FINALLY FITTED they were a BITCH! but theyre in and they look spot on!
dash is fitted! steering collum gave me some problems so had to dismantle the colloum re assemble and re fitted it and it went straight in!
smarted up the engine bay some more cleaning all the grimey bits and fitted the strut brace
as i lowered the car more the exhaust rattled BADLEY on the axle but ive sorted that also resprayed the
sideskirts arches and bumper tops LOOKS SO MUCH BETTER!
here are some pictures.
p.s this hasnt been cleaned for the pics!
http://i16.photobucket.com/albums/b9/rover25/P5130015.jpg
http://i16.photobucket.com/albums/b9/rover25/P5130014.jpg
ive had to leave the fuse box part of the dash off as i need to do the electric windows and the central locking.
http://i16.photobucket.com/albums/b9/rover25/P5130013.jpg
http://i16.photobucket.com/albums/b9/rover25/P5130012.jpg
http://i16.photobucket.com/albums/b9/rover25/P5130011.jpg
http://i16.photobucket.com/albums/b9/rover25/P5130010.jpg
http://i16.photobucket.com/albums/b9/rover25/P5130009.jpg
http://i16.photobucket.com/albums/b9/rover25/P5060008.jpg
http://i16.photobucket.com/albums/b9/rover25/P5050005.jpg
http://i16.photobucket.com/albums/b9/rover25/P5050003.jpg
not alot to do
re do the red line around the grill fit the universal electric central locking and wire up the sound system.
OH SO CLOSE
rashcupra
24-05-2008, 01:37 AM
wel ive taken some final pics here as the interior is all in, sound system has all been completly rewired, the electric windows have been fixed, central locking has been fitted, horn has been fixed and also n/s indicator has been fixed the car is COMPLETE VIA SUPERCHARGER! im exstremly happy with her and i hope you all are too! please all comments welcome on the finished product as i stated a few posts ago im trying to get my slideshow up but its not working!
anyway here are some MORE pics hope you like!
http://i16.photobucket.com/albums/b9/rover25/P5230005.jpg
http://i16.photobucket.com/albums/b9/rover25/P5230007.jpg
http://i16.photobucket.com/albums/b9/rover25/P5230010.jpg
http://i16.photobucket.com/albums/b9/rover25/P5230008.jpg
http://i16.photobucket.com/albums/b9/rover25/P5230009.jpg
http://i16.photobucket.com/albums/b9/rover25/P5230011.jpg
http://i16.photobucket.com/albums/b9/rover25/P5230002.jpg
http://i16.photobucket.com/albums/b9/rover25/P5230003.jpg
mot tax insurance left to do :funk:
look forward to the first proper drive :D
Oddball
24-05-2008, 04:02 AM
Whoaaa BABY!!!! :aargh4: I don't normally go in for the modifieds but that there is one sweet as ride my man. If you ask me, you should take up that kind of task professionaly, make yourelf a bundle! Excellent work, and a car to be really proud of. :beerchug::notworthy:afro::biggthump
onzarob
24-05-2008, 11:26 PM
:beerchug:
Congrats on a great project and thank you for sharing it with us....fantanstic...I'm reaching for the classifieds to find a suitable project right now;)
StuPDi
26-05-2008, 06:34 PM
looks soo good :)
a lot of work well worth it :)
slightly off topic, did you used to own a red mark3 ibiza Cupra????
Stu
rashcupra
26-05-2008, 10:13 PM
no mate i didnt ^^^
StuPDi
26-05-2008, 10:33 PM
sorry, obviously had someone else in mind???
can't remember who :(
as said, had a red mk3 cupra, and was on SCN up till 18 months or so back
Stu
:beerchug:
Congrats on a great project and thank you for sharing it with us....fantanstic...I'm reaching for the classifieds to find a suitable project right now;)
x 2 - brilliant and inspiring thread.
Car looks amazing.
bora(ing) nick
27-05-2008, 12:42 PM
well done!
All the hard work has finally paid off!
rashcupra
30-10-2008, 10:23 PM
car was sold not long ago as i couldnt afford the fuel bill for a v6 mk2 and a big turbo beezer but im on the look out for a new project not QUITE as old skool but a mk5 golf r32 :D
r32+money=4x4 and fast
mluton
31-10-2008, 12:41 AM
That would be a nice project
Oddball
01-11-2008, 03:48 PM
Whereabouts did it go? I was sure I saw it a while ago up here in edinburgh, at the time I passed it off because you live in england, but reading your last post perhaps it was.
rashcupra
03-11-2008, 08:48 PM
nope sold loacally in brighton area so im pretty sure it wasnt.
paulthefox
26-02-2009, 11:37 PM
just read all this thread took me 1 hour
you are a genius my friend:beerchug:
onzarob
27-02-2009, 12:10 AM
just read all this thread took me 1 hour
you are a genius my friend:beerchug:
I agree a beautiful piece of work, not seen him around here lately. a very welcome member:D
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.