Power steering feed pipe

[stephenwhite990]

The connection from the power steering fluid reservoir is leaking where it connects to the power steering pump , the rubber pipe is connected to an elbow with a jubilee clip and that is fine , the elbow just seems to push into the power steering pump and has an orange rubber o ring on it , it seems loose but there is no fixing or circlip , should this just be a push in or pull out connection , does it just need a new o ring???? I know its only the low pressure feed pipe but it seems odd , it is dripping from where this metal elbow pushes into the pump ???

[Crasher]

Which year and engine?

[stephenwhite990]

1.9 TDI AFN 110 bhp r reg 1997

Sent from my HTC Sensation Z710e using Tapatalk 2

[Crasher]

It is a ZF pump but VAG list no spares, there may be an O ring under there or it may just be sealed in, not sure.

http://i222.photobucket.com/albums/dd20/Crasher1964/A4TDIPSpump8D0145156K_zpse846a866.jpg

The ZF exchange part number is 2859 801 and you can contact ZF uk via ZF Friedrichshafen AG | ZF Aftermarket Car Products (http://www.zf.com/eu/content/en/great_britain/corporate_uk/products_services_uk/zf_products_in_the_uk/products_cars_uk/products_cars_uk.html)

[stephenwhite990]

There is an o ring which has split , now trying to find the right size o ring .

Sent from my HTC Sensation Z710e using Tapatalk 2