View Full Version : Polo 9N Can-bus or Not Canbus?
shaiboy_uk
04-11-2012, 11:27 PM
Hi All,
Quick question :)
Will a Polo 9N 2005 plate use can-bus or not? for lighting
Thanks
Cheers
Shaiboy_UK aka Paul
Guest 2
04-11-2012, 11:41 PM
According to Rosstech in this quote they refer to the CAN gateway so I can only assume it is.
SRC - VW Polo (9N) Central Electronics - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/VW_Polo_(9N)_Central_Electronics)
Special Notes
Replacing
When replacing the Central Electronics control module make sure to transfer to CAN-Gateway (#19) Coding as well since this is part of the Central Electronics Control Module.
If you look here http://www.vwaudiforum.co.uk/forum/showthread.php?131631-2002-9N-Polo you will see the vcds scan picking up a can gateway module.
shaiboy_uk
04-11-2012, 11:52 PM
emmm... I thought the can gateway was a different thing though, from can-bus for lighting?
When I do a scan in vcds when you try and do auto detect, it says it can't cause "Can" not detected, but as said thought can-bus for lighting was different :/
Even more confused now lol
Gizmo68
05-11-2012, 01:23 AM
Pretty sure the Polo and Fabia etc are still not true CANBUS
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.