PDA

View Full Version : First scan... and an error!



MFGF
28-04-2012, 05:02 PM
I scanned my car for faults this afternoon. One fault was found:

Address 19: CAN Gateway (J533) Labels: None
Part No SW: 4G0 907 468 G HW: 4G0 907 468 A
Component: J533--Gateway H08 0214
Revision: -------- Serial number: 00000000362056
Coding: 00CD074400
Shop #: WSC 02391 785 00200
ASAM Dataset: EV_GatewUDS 001025
ROD: EV_GatewUDS_AU57.rod
VCID: 346C161C9F204E9
Control unit for battery monitoring:
Subsystem 1 - Part No SW: 8X0 915 181 HW: 8X0 915 181
Component: J367-BDM H07 0141
Serial number: 00000000003790496442
Voltage stabilizer:
1 Fault Found:
12291 - Energy Management Active
U140B 00 [008] - -
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 7
Fault Frequency: 1
Reset counter: 41
Mileage: 16 km
Date: 2012.04.13
Time: 22:01:27

The date and time indicate that this was 14 days before the car was delivered new!

I have cleared the fault and it hasn't returned. I would have expected this to be found and fixed as part of the PDI though. I will keep an eye out for it recurring...

MF.

Guest 2
28-04-2012, 07:27 PM
Sounds like the battery went into sleep mode .. I think I remember you saying your car sat for a month or so and its just the car going into said sleep mode (i think!) ;)