hub

[wax]

hi guys!!
i got a 'p' reg A4 tdi and having some problems with removing the front drivers side hub.... any idea on how to remove it or any tips on how it should be done...
thanx guys!

[rhencullen1989]

hi, if its the same as a 1.8 T petrol, then the hub is a press fit into the wheel bearing. How far have you got it stripped out? to replace a wheel bearing you need to remove the complete knuckle assy from the car, then the hub can be removed by pressing out from behind. I suppose a puller could be used if you just want to replace the hub, but its bad practice to load up the inner race to press a new one on, its usually pressed on by pressing on the inner race from behind.