rapid_donkey
23-12-2011, 07:53 PM
I have had an RNS-E sat nav unit installed on my Audi A3 8P 2003 model.
The installer used a laptop with VCDS to code it all to the car.
Today after a scan with an Autel handheld scanner, I am getting 4 fault codes under 'navigation'.
I presume it has been coded incorrectly. I have an A3 8P with Bose.
I have found a website, which for £4.99, will give me the correct coding for my spec vehicle but I dont have the hardware to do it!
I am from Bedfordshire, but dont mind a bit of travel if anybody can help.
Thanks in advance.
The installer used a laptop with VCDS to code it all to the car.
Today after a scan with an Autel handheld scanner, I am getting 4 fault codes under 'navigation'.
I presume it has been coded incorrectly. I have an A3 8P with Bose.
I have found a website, which for £4.99, will give me the correct coding for my spec vehicle but I dont have the hardware to do it!
I am from Bedfordshire, but dont mind a bit of travel if anybody can help.
Thanks in advance.