Headlight adustment?

[simbaboy]

Does anybody know if main beam adjustment is possible on xenon's mine's a tad to high i assume being bi... it can't be done.

[Guest 2]

Xenon levelling is controlled by sensors on the car dependant on load and this factors how much the lights move up and down.

I'm not sure if a fault code scan would show anything but it may be worth a try.

[simbaboy]

Sorry i forgot to say dipped beam is o/k, its the high beam that's to high.

[Bratty]

Does anybody know if main beam adjustment is possible on xenon's mine's a tad to high i assume being bi... it can't be done.

If you open the bonnet, around the headlight unit is an adjuster, turn it anti-clockwise to lower the Beam-Assembly, Check your headlight screws are tight first.

If in doubt take a VERY expensive Scarey trip to the <removed>??

[kite]

xenons must be put into "service" mode with VCDS before adjustments are made.