PDA

View Full Version : Please help with a problem with the CO



eenaoo
18-07-2011, 09:17 PM
Hi,

I got an issue with my 1197 model gasoline 1.8 Vento. The CO level is too high (about 0.7) at 2500 RPM. The CO level is fine at low RPM. Any ideas? No diagnostic codes are given by the car.

Regards Arne

towcestervag
28-07-2011, 07:23 AM
check the carb(monojet) base gasket as these split and affect co

eenaoo
28-07-2011, 07:31 AM
I found the fault. It was the catalyzator that was not working.

Regards Arne