Parking sensors and the reverse live wire (What colour)?

[jcdub]

Does anyone know the colour of the positive wire coming from the reverse lamp so I can hook up my parking sensors?

Thanks

[Peter D]

Go on give us a clue as to what car, year and model you have. Regards Peter

[Peter D]

If it is RHDD then I suspect it is black and green. Regards Peter

[jcdub]

If it is RHDD then I suspect it is black and green. Regards Peter
DOH! My fault. Its a 2009 audi A6 A line 2.0 tdi cr saloon, hope that helps

Cheers

P.S what is RHDD? (righthand drive)

[Peter D]

A Typo. RHD Right Hand Drive. Same Colour. Regards Peter

[jcdub]

A Typo. RHD Right Hand Drive. Same Colour. Regards Peter

Thanks for that Peter.

[jcdub]

[QUOTE=Peter D;654189]A Typo. RHD Right Hand Drive. Same
Ok I got my parking rear sensor's installed yesterday. All fairly basic that was until I tried to connect it to the reverse power cable. I checked the black wire with a trace of green a suggested and it looked like the wire that carries the 12 volt's, but when I spliced into it didn't work! So I checked it out again and it likes like the right one. So as a precaution I checked out against the earth for continuity and I got a signal. Anyway I found your out was the yellow and green wire you need to connect to to make it with

J

[harib]

Yep, I can confirm, GREEN and YELLOW for rear parking sensors