PDA

View Full Version : Important Ignition Coils - Audi Campaign 28E9



Keyser Soze
18-05-2011, 11:51 PM
Whilst looking on Erwin I came across details of a campaign 28E9 regarding the checking & replacement of ignition coil packs across all such equipped petrol engines. So I dare say that there may well be some mileage with chatting to the local dealer over this.


Workshop campaign 28E9
Transaction No.: 2019112/10
Replacing ignition coils
Release date: 03-Mar-2011

Notes
http://www.audi-sport.net/erwin/rp/elsaweb/themes/common/css/tpl/pfeil-unten.gif Repair instructions (http://www.audi-sport.net/vb/#arbeitsanl-feldaktion-id)
Technical background

It is possible that an ignition coil can fail to function, in which case the emissions warning lamp will light up, as designed. In some cases, the customer may also notice that the engine does not pull smoothly.

Remedy

The ignition coils must be checked on all affected vehicles and replaced if necessary.

Customer notification

Please notify customers who have taken delivery of one of the affected vehicles when the vehicles are next in the workshop.

Please ensure that all affected vehicles are checked and repaired during the next service visit. Make a note of the required campaign on the workshop order before it is signed by the customer.

If it is omitted to perform the work required for the campaign during a workshop visit, notify the customer about the campaign immediately.

You should also pass on this information to your new and used car sales departments so that the vehicles affected are checked and, if necessary, repaired immediately.

Warranty accounting instructions

Damage number:

28E9 099 002

Repair code:

Damage cause: repair operation / replacement part (AP/ET) (ignition coil)

Type of claim:

7 10 = Campaign implemented on registered vehicle

7 90 = Campaign implemented on vehicle that has not yet been registered

Note:

When making out the claim, only the applicable criterion from those listed below should be entered in the window "criterion ID".

The criteria which are displayed in the "vehicle-specific notes" but not listed here serve statistical purposes only and do not have to be entered when charging for work performed.

Only the following criteria are processing-related and should be billed.

Criterion:

See "vehicle-specific notes" (in Service Online or ELSA)

ZA = 3.6 ltr. FSI engine

ZB = 2.8 ltr. FSI engine

Z0 = 5.2 ltr. FSI engine

Z1 = 1.8 ltr. turbo MPI engine / 1.8 ltr. turbo FSI engine

Z2 = 2.0 ltr. FSI engine/2.0 ltr. turbo FSI engine/ 2.0 ltr. MPI engine

Z3 = 2.4 ltr. MPI engine

Z4 = 2.7 ltr. turbo MPI engine

Z5 = 3.0 ltr. MPI engine

Z6 = 3.2 ltr. FSI engine / 3.2 ltr. MPI engine

Z7 = 3.7 ltr. MPI engine

Z8 = 4.2 ltr. MPI engine / 4.2 ltr. FSI engine

Z9 = 6.0 ltr. MPI engine