Audi B6 VCDS Lite and central Locking Fault

[Grover2000]

Hi can anyone help with the coding of my Audi 2001 B6 2.0 petrol. The car seems to self lock after the key is removed from the steering.

Is this a fault or is there coding that could fix this.

About a year ago I altered the code to make the car sound the chirp each time the alarm was activated. This was fine and still is but this fault has come to light and I require some assistance.

Vag scan shows no errors except Central electrics shows "Too may communication errors to continue"

Any help on the matter is greatly appreciated.

Thank you

Grover

[martin1810]

It would make sense to post the results of your scan.

[Grover2000]

Sorry

Chassis Type: 8E - Audi A4 B6/B7
Scan: 01,02,03,08,09,0F,11,15,16,17,18,36,37,45,46,55,56 ,57,65,67,69,75,76,77
-------------------------------------------------------------------------------
Address 01: Engine Labels: Redir Fail!
Controller: 8E0 909 557
Component: 2.0L R4/5VS 0003
Coding: 0011501
Shop #: WSC 63351
2 Faults Found:
16500 - Engine Coolant Temp. Sensor (G62): Implausible Signal
P0116 - 008 - Implausible Signal
17947 - Clutch Pedal Switch (F36): Implausible Signal
P1539 - 004 - No Signal/Communication
Readiness: 0000 0000
-------------------------------------------------------------------------------
Address 09: Cent. Elect. Labels: 8E0-820-043.LBL
Controller:
Note: Excessive Comm Errors

-------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 8E0-959-655-84.LBL
Controller:
Note: Excessive Comm Errors
End -------------------------------------------------------------------------

AC is not working is this related?

Any help is greatly appreciated

Grover

[martin1810]

Does the scan stop at address 16. The problem you first highlight is usually address 46.
Can you get a scan with full VCDS to see if that works better. I think you will need to get to address 46 to check the settings.