Front Bumper HELP

[mumutley]

Hi all :1zhelp::1zhelp:

I have a Audi A4 V6 2.6 1996 Ready for cam belt change:aargh4:
How do I remove the front bumper??:confused::confused:
I have removed both front plastic inner wheel arch trims and a couple of 10mm bolts these came out of the metal brackets coming from the inner wing to a lip on inside of the bumper.
I have removed the grill trims from the front bumper, were the front fog lamps would be and can see two bolts going into the body/chassis but can not see how to get to third bolt??:confused::confused:

All I want to do is pull the whole front end foward a couple of inchs to allow me better excess to the front of the engine and cam belt.

HELP:1zhelp::1zhelp:

[olds_kool]

where you removed grills look up into bumper bar and you will see two allen head bolts, these connect bumper to mounts
then remove screws at side that join bumper / inner wheel arch and pull bumper off guides at the side

once bumper is off you have access to front end bolts

[a4orté]

after you take the bolts out in the grill all you need to do is un hook the corners by the arches.