PDA

View Full Version : Question Removal of Aircon fascia panel '07 +



ksearing
04-04-2011, 08:40 PM
I need to make a hole in the cubbyhole under the aircon controls to thread a cable through to the radio for an mp3/aux unit. To do this I need to pull the whole aircon/cubbyhole panel out. There is a screw at the back of the cubbyhole but I can't see how the top of the aircon panel is fixed. Any ideas? Thanks, Keith

kevshek
01-05-2011, 04:38 PM
Ive recently took the stereo out so had the upper facia off, cant say ive notice any screws going down onto the top of the AC panel. Double check there, if there isnt any, chances are it'll just be clipped in at the top. If you have trim panel removing tool, just try shoving one in the top, or any old bank card and pry it off.