Login code for Cruise coding on A4 3.2

[kndkris]

Hey all,
well i have the cruise installed but am having issues with the coding. I have an 05 A4 Avant 3.2 v6 i have set the Engine coding (long coding) to accept the Cruise which was no problem but when i go to set the Steering Wheel coding it wont change it just reverts back to what it was. The login button is appearing so i assume i need to login before it will allow me to make the change, but i have no idea where to get the Login code from?
You can see in the pics below what i mean.

Does anyone know how to find this code?

http://i179.photobucket.com/albums/w313/kndkris/logincode.jpg
http://i179.photobucket.com/albums/w313/kndkris/steeringwheelcode.jpg

[kite]

http://www.vwaudiforum.co.uk/forum/showthread.php?t=52211&highlight=dis+cruise&page=2

[kndkris]

Cheers Kite, i still could not see in that thread a login code for 16-Steering Wheel. The only code i saw was for engine (11463) but i already ave that bit coded.
Should there not be a login for module 16? does it have something to do with the workshop # ?

[kndkris]

still stuck on this, ive searched everywhere but cant find anyone with the same issue...

[martin1810]

Some controllers like to see a workshop code. Go back to your first VCDS set up screen and change the workshop code from 00000 t0 12345 etc. Then try coding again.

[kenney]

Steering Wheel Electronics}

Control Module Coding

Select 16 (Steering Wheel Electronics)
Coding -> Function 07

00?xxxx: Transmission

0 - Manual Transmission
1 - Automatic Transmission

00x?xxx: Steering Wheel
I don't think there is a login code for the steering modul

0 - 3-Spoke, w/o Tiptronic, w/o Multi-Function
1 - 3-Spoke, with Tiptronic, w/o Multi-Function
2 - 4-Spoke Multi-Function (with Radio Control)
3 - 4-Spoke Multi-Function (with Radio/Telephone Control)
4 - 4-Spoke Multi-Function (with Radio/Telephone/Voice Control)

00xx?xx: Tiptronic/Heating

+1 - Tiptronic on Steering Wheel
+2 - Steering Wheel Heating

00xxx?x: Cruise Control/Board Computer

0 - no Board Computer, no Cruise Control
1 - Board Computer, no Cruise Control
2 - no Board Computer, Cruise Control
4 - Board Computer, Cruise Control

00xxxx?: Rear Wiper

0 - w/o Rear Wiper
1 - with Rear Wiper
I don't think there is a login code for the steering modul

[kndkris]

martin1810 you are a legend, that was the issue, as soon as i set the worksop code to 12345 from 00000 and restarted VCDS the steering wheel accepted the new code!!!!! tanks heaps mate.