View Full Version : RED TDI and boot VW badge
redtony
28-06-2007, 05:32 PM
Got a all silver TDI letters. But got a decat and sports panel filter, took it up to 100BHP
So Im gonna get a new TDI badges with 1 red I.
How easy are they to take off and fit, also how easy are the rear VW badge on boot to take off and fit as mines changed colour from silver black to silver grey. Any guides, cheers
thanks in advance
prolfe
28-06-2007, 05:53 PM
Got a all silver TDI letters. But got a decat and sports panel filter, took it up to 100BHP
So Im gonna get a new TDI badges with 1 red I.
How easy are they to take off and fit, also how easy are the rear VW badge on boot to take off and fit as mines changed colour from silver black to silver grey. Any guides, cheers
thanks in advance
I took my badges off without any problems. You have to protect the paintwork as you do it. I used a piece of paper folded over twice under the badge at the opposite side to the bit i was prising off. otherwise you'll lever it off into the paint and it will scratch it.
i used a knife to prise it off.
redtony
28-06-2007, 06:04 PM
Are they not glued on somehow? thought they was
or do they clip in? I have white like gluey stuff around the edges of mine
prolfe
28-06-2007, 10:29 PM
Are they not glued on somehow? thought they was
or do they clip in? I have white like gluey stuff around the edges of mine
it's just a sticky foam pad that is used.
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.