knowlden
09-04-2006, 02:06 PM
Hi, i am hoping someone may know a re-set for the CLIMAtronic system.
My problem is that when i turn my ignition on all characters on the display flash untill i press any button, then all buttons change the correct setting on the display but there is no out from the heater/blower. I have check the fuses etc. and the wiring at the back of the display and all seem fine, I removed all the connections on the display to see if this might initiate a reset (it didn't) but after taking the 2 righthand plugs out the blower came on full power ????
So at the moment i think i might be looking at a new control pannel please can anyone help :banghead:
My problem is that when i turn my ignition on all characters on the display flash untill i press any button, then all buttons change the correct setting on the display but there is no out from the heater/blower. I have check the fuses etc. and the wiring at the back of the display and all seem fine, I removed all the connections on the display to see if this might initiate a reset (it didn't) but after taking the 2 righthand plugs out the blower came on full power ????
So at the moment i think i might be looking at a new control pannel please can anyone help :banghead: