PDA

View Full Version : Please Help Air bag light on



bambamjj
06-01-2011, 10:44 PM
I took the glove box out and disconnected the Air bag switch plug from back of glove box. Now i cant turn warning light off, Tried vag com to clear faults but it is still on. Can anyone help?

Many thanks

Jon

bambamjj
07-01-2011, 12:24 AM
Just checked VAGCOM and it is coming up with no faults for airbag? :confused:

Crasher
07-01-2011, 12:29 AM
The light is on but there are no codes? Thats odd.

bez101
07-01-2011, 03:07 PM
I took the glove box out and disconnected the Air bag switch plug from back of glove box. Now i cant turn warning light off, Tried vag com to clear faults but it is still on. Can anyone help?

Many thanks

Jon
did you reconect the airbag switch ?
did you turn the switch off as when its off it shows a light to let you know its off

bambamjj
09-01-2011, 05:56 PM
did you reconect the airbag switch ?
did you turn the switch off as when its off it shows a light to let you know its off

Well i checked the connection and all is well and the key switch in glove box is "Airbag on"

Am i using Vagcom correctly, does ignition need to be on when i do the scan.... half way thru it asks me to turn iginition of then after count down, back on.

Getting frustrated now :aargh4:

bez101
09-01-2011, 06:04 PM
what vcds are you useing
igg needs to be on then scan the airbag channel
i never have to turn mine off then on

Crasher
09-01-2011, 07:17 PM
Yes the ignition must be on, if VAG-COM is getting jumpy about the air bag comms something is wrong as this only happens when VAG-COM thinks there may be an air bag ECU issue as a few years ago they had some instances of VAG COM damaging the ECU, which was the fault of the ECU itself incidentally.

bambamjj
09-01-2011, 08:57 PM
I am using VCDS release 10.6.3.

It has always asked me to turn of ignition to avoid damage to Airbag controller when doing a fault check.

Do you think i need to put into dealer?

Thanks for comments all.

bambamjj
09-01-2011, 09:58 PM
Below is list of modules that were scanned... should there not be more? i have blanked out the vin number.

Sunday,09,January,2011,20:46:53:28125
VCDS Version: Release 10.6.3 (x64)
Data version: 20101206
Ross-tech, LLC



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 8E - Audi A4 B6/B7
Scan: 01 02 03 08 09 0F 11 15 16 17 18 36 37 45 46 55 56 57 65 67
69 75 76 77

VIN: XXXXXXXXXX Mileage: 128270km/79703miles
-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: 8E0-820-043.lbl
Part No: 8E0 820 043 BL
Component: A4 Klimaautomat 2833
Coding: 00000
Shop #: WSC 00000
VCID: 6CD2444D360D

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. Labels: 8E0-907-279-8EC.lbl
Part No: 8E0 907 279 M
Component: int. Lastmodul ECE 0907
Coding: 00011
Shop #: WSC 03743
VCID: 3C72B40D06ED

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 8E0-953-549.lbl
Part No: 8E0 953 549 Q
Component: Lenksáulenmodul 0701
Coding: 03041
Shop #: WSC 03743
VCID: 418CC5F9610F

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments Labels: 8E0-920-9xx-8EC.lbl
Part No SW: 8E0 920 951 L HW: 8E0 920 951 L
Component: KOMBI+WFS 4 H14 0200
Revision: 0200 Serial number: 00000000000000
Coding: 0004411
Shop #: WSC 03743 444 00001
VCID: 33609F312BB3

No fault code found.

-------------------------------------------------------------------------------
Address 37: Navigation Labels: 8E0-035-192-RNSE.lbl
Part No SW: 8E0 035 192 T HW: 8E0 035 192 T
Component: RNS-E HIGH EU H76 X---
Revision: 67S Serial number: AUZBZ7Z4521844
Coding: 0309715
Shop #: WSC 03743 444 00001
VCID: 3564A12925C7

1 Fault Found:
00858 - Connection; Radio ZF Output to Antenna Amplifier
007 - Short to Ground
Freeze Frame:
Fault Status: 01100111
Fault Priority: 5
Fault Frequency: 1
Reset counter: 241
Time Indication: 0
Date: 2011.01.06
Time: 17:53:49

Freeze Frame:
Mileage: 655350 km
Count: 601
Clock: 17:53


-------------------------------------------------------------------------------
Address 45: Inter. Monitor Labels: 8E0-951-177.lbl
Part No: 8E0 951 177
Component: Innenraumueberw. 0804
Coding: 00001
Shop #: WSC 00000
VCID: EBD0C751B303

No fault code found.

-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 8E0-959-433-MAX.lbl
Part No: 8E0 959 433 CH
Component: Komfortgerát T3B 4135
Coding: 06895
Shop #: WSC 06325
VCID: 79FC6D19495F

Part No: 8E2959802F
Component: Tőrsteuer.FS BRM 0606

Part No: 8E2959801F
Component: Tőrsteuer.BF BRM 0606

Part No: 8E0959801E
Component: Tőrsteuer.HL BRM 0606

Part No: 8E0959802E
Component: Tőrsteuer.HR BRM 0606

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio Labels: 8E0-035-192-RNSE.lbl
Part No SW: 8E0 035 192 T HW: 8E0 035 192 T
Component: RNS-E HIGH EU H76 X---
Revision: 67S Serial number: AUZBZ7Z4521844
Coding: 0309715
Shop #: WSC 03743 444 00001
VCID: 3564A12925C7

1 Fault Found:
00858 - Connection; Radio ZF Output to Antenna Amplifier
007 - Short to Ground
Freeze Frame:
Fault Status: 01100111
Fault Priority: 5
Fault Frequency: 1
Reset counter: 241
Time Indication: 0
Date: 2011.01.06
Time: 17:53:49

Freeze Frame:
Mileage: 655350 km
Count: 601
Clock: 17:53


-------------------------------------------------------------------------------
Address 77: Telephone Labels: None
Part No SW: 8P1 862 335 HW: 8P1 862 335
Component: FSE_256x BT H41 0650
Revision: 00000000 Serial number: 00000005209523
Coding: 0011722
Shop #: WSC 00000 444 00000
VCID: F4E2DC2DEE3D

No fault code found.

End ---------------------------------------------------------------------

Crasher
10-01-2011, 12:34 AM
No, you do not interrogate the SRS ECU with the ignition off, how do you expect it to communicate if it has no power! You are misreading the air bag warning, just do it with the ignition on…

bambamjj
10-01-2011, 10:45 AM
Thanks for response, i have just tried with the igniton on but it is still saying no response from controller.... where is the ecu for the airbags?

bambamjj
10-01-2011, 12:16 PM
All fixed :biglaugh:

Thanks to a very nice man at Ilexa.

One of the tick boxes should have been untickled in the settings boxed.

Thanks all for your responses.

Crasher
10-01-2011, 01:16 PM
Ilexa are a good company.

nick1buy1
26-02-2014, 10:23 AM
Do you remember which tick box was left unticked? As I have the same issue.... Thanks


Sent from my iPhone using Tapatalk