PDA

View Full Version : electric adjustable steering column fault



allroadkev
28-11-2010, 12:19 PM
i have 2007 3.0 tdi, the problem being the steering column goes in and out, but not up and down, VCDS brings up no fault code,

How can I investigate this further guys?

is there a test in VCDS I can do?( full license)

thanks

Jam Man
03-12-2010, 07:32 PM
I have a brand new cowelling with switch and control unit. In dark grey / black & never fitted Bought for mine but the problem was in fact a trapped cable behind the column. let me know if you want it. Yours for 40 + postage which is less than half what I paid from Audi. Saves me experiencing the traumas of Ebay!

allroadkev
04-12-2010, 06:50 PM
if its that ill have it off you, how do i know if its that though? or is that all it can be

a8 tech
04-12-2010, 07:43 PM
you need to simply re adapt/teach in basic setting via vag com

allroadkev
05-12-2010, 11:00 PM
i cant find a controller for steering column electrics, which one is it?

a8 tech
05-12-2010, 11:12 PM
address 09 central electrics

Basic Setting
Steering Column Adjustment

Prerequisites:

* Steering Column or the Central Electronics Control Module (J519) have been replaced.
* Approach all 4 end positions (up, down, forward, back).

[Select]
[09 - Central Electronics]
[Basic Settings - 04]
Group 001
[Go!]
Activate the Basic Setting.
[ON/OFF/Next]
The adjustment should now be learned.
[Done, Go Back]
[Close Controller, Go Back - 06]

allroadkev
06-12-2010, 10:13 PM
thanks jam man, wont be needing part, done what a8 tech said, all working.

top job, you the man.

i had quite a lot of fault codes come up, ill start new thread later, hope you may help.