PDA

View Full Version : Glove Box Removal B6



Davidj241
09-06-2007, 06:34 PM
Can anyone tell me how to remove the glove box from my 2007 Passat B6.?
I want to fit the VW IPOD adaptor kit but am unable to get the cable into the glove box without its removal.

Thanks in advance for any info.

Flash2
16-06-2007, 12:54 AM
Remove 4 torx screws from inside the glovebox. They are at the top of the opening. Can't see the centre two? Have a good look and you'll find them.
Remove 3 torx screw from the outside of the glovebox, under the dash.
While your under there, have a look on the plastic trim that goes back towards the carpet. Near the front at the centre you should see a verticle slot about an inch long. Stick the blade of a flat screw driver in there and the bottom of the glove box should release. You should now be able to lift the box out of the dash. You shouldn't need to disconnect any wiring (or the rubber aircon hose), just sit the box on the floor. If you do disconnect the wiring, keep the ignition off or you'll end up with the airbag light on.

Regards - Jim.