View Full Version : wheel stud pcd?????
tut_gareth
07-06-2007, 01:02 PM
hi
having just bought a 1987 90 2ltr 5cyl for a trip i'm planning to make.
does any one know what the wheel stud pattern and pcd is?
and what cars have compatible wheels?
as i havent got the car yet and i'm looking for some new wheels for it
cheers:D
Model / Year / PCD / Offset / Centre Bore
80/90/Coupe 92 to 95 4x108 35 to 42 57.1
As for what else will fit, not a lot really, I'm afraid.
Citroen Peugeot Ford Volvo Saab all use the same PCD, but the offsets and bores are all wrong
tut_gareth
07-06-2007, 02:46 PM
so as mine is 87 it could be the same as 92 to 95 then?
(....... or could they be 4x100? ............... which would be nice)
cheers
Sorry, I misread your original post completely!
I think from memory they're a 4 x 100. I know I had Audi 80 multispokes on my 86 MKII Golf without a problem.
tut_gareth
07-06-2007, 03:27 PM
that would be good as i have still got my standard wheels off my corrado so no need to buy.....:D
cheers
RJS_90q
07-06-2007, 10:51 PM
My 90 quattro (1988 year) is also 4 x 108 PCD
Regards,
Bob
RJS_90q
07-06-2007, 10:53 PM
I meant to also mention that the bolt diameters are larger than the VW ones too.
Maybe you could find some suitable wheels on ebay ?
Regards,
Bob
tut_gareth
08-06-2007, 10:43 AM
yep think i'll be keeping an eye on the ebay.
scotty33
08-06-2007, 08:28 PM
The pcd for an '87 90 is 4 x 108. if its a later car (type 89/B3) the offset or ET is 45. The earlier type 85 model I'm not sure what the ET should be.
I've seen peugeot and ford fitments used, but these come with incorrect offsets and larger centre bores.
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.